Traditional T-Series 7 inch Roof Fan

  • Extract/intake models in 4 sizes: 6”, 7”, 9” and 12”
  • Patented electronic shutter system ensures quiet, trouble free operation
  • For the very best from your fan use the Ecotronic controller
  • T-Series controllers and sensors save energy by only switching on the units when you want them to, either manually or automatically
  • Easy fit connector Top Socket, standard on all models
VA_T_Series_Roof_Range.jpg

Product Overview

Ventilation Type
Commercial Ventilation
Sector
Commercial
Application
Schools
Hospitals
Restaurants
Product Range
Traditional T-Series Roof

UK’s No. 1 Commercial Fan

With a low profile cowl, the T-Series Roof model is suitable for installation in horizontal, angled (max pitch 30deg) and vertical glass and for fixing plates in roofs. For vertical windows or walls in exposed areas and single or double glazing including most types of glass up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. All four sizes of Vent-Axia roof plate assemblies can be fitted easily into flat roofs.

T-Series features a unique speed control pack which enables high, medium or low speed to be preset to suit room size or required duty. When used with a T-Series TSC controller, the speed control pack is removed from the T-Series fan and fitted into the 3-pin socket in the back of the controller. The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting and ‘E’ mode. When using the Ecotronic controller the speed control pack remains in the fan.

Shutter

With energy saving in mind, T-Series Fitting Kits are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. It will operate on both intake and extract and at any angle of mounting.

When the fan is used with a T-Series or Ecotronic controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Electrical

Motor purpose-designed. Suitable for running at any angle. Quiet running, enclosed. Suitable for operation in ambient temperatures from -40°C to +50°C.

Fitted with Standard Thermal Overload Protection (S.T.O.P.).

Supply voltage 220-240V/1/50 Hz.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

 

Product Downloads

Installation Instructions

Other Documents

Accessories

/VA_TSeries_Controller.jpg
Traditional T-Series Controller
  • 3-speed operation
  • Finger-tip sliders
  • Double pole On/Off Switching
  • Extract/intake airflow direction
  • Sensor mode for use with suitable electromechanical switches
  • Shutter open / fan Off setting
  • Designed to meet IP20
  • BEAB approved