ThermoSwitch

  • Setting range: +6°C to +30°C
  • Two internal range limit/locking rings are included to allow setting within a limited temperature range or locking at a fixed t/o point
  • IP20 rated
  • Sealed sensing mechanism
  • Snap-action, single pole, changeover contacts
  • Mounting direct on surface only
  • Electrical connection to screw type terminals with rear or side cable entry
  • Contact rating: 1.5 amp (inductive)
  • 16 amps (resistive)
  • Max Voltage 250V
Jump to: Overview Downloads
/Vent-Axia%20ThermoSwitch.jpg

Product Overview

Ventilation Type
Other Products
Sector
Commercial
Product Range
Controllers & Sensors

Automatically switches On fans on either a rise or fall in air temperature. The ThermoSwitch can be used with all Vent-Axia fans (via switch gear if appropriate) for the removal of warm air from buildings. It can also be used to switch On Hi-Line ceiling fans for summer cooling and to move high level warm air down to the working level during winter.

Product Downloads

Installation Instructions