Solo Plus P

  • Filterless as standard - innovative impeller design means no need for a filter
  • Meets current Building Regulations Approved Documents F & L requirements for domestic bathrooms and toilets
  • IPX4 rated
  • Flush or surface mountable
  • Adjustable rear or side exit spigot
  • Extremely low sound levels
  • Suitable for wall, ceiling and panel mounting
/VA_Solo_Plus_Range.jpg

Product Overview

Ventilation Type
Residential Ventilation
Sector
Private Refurbishment
Application
Bathroom
Kitchen
Utility
Toilet
Product Range
Solo Plus
Ducting/Connection Size
100mm

Bathroom and Toilet Ventilation
The Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Solo Plus can be flush or surface mounted, with a 100mm circular spigot for rear entry or connecting to a vertical ducting system. The spigot can also be adjusted for side ways exhaust enabling recessed ceiling installations within limited ceiling voids. The powerful centrifugal impeller allows for installations with longer duct runs using 100mm ducting, whilst
still achieving 15 l/s as required by Document F of the current Building Regulations.

Continuous running products, such as the Solo Plus installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore, only needs to move the amount of air as laid down in table 1.1b of Document F.

The Solo Plus has a choice of two boost/override motor speeds set at installation, medium (17l/s) or high (22l/s), with an optional constant trickle speed (9l/s), also selectable at installation except in the P model. Depending on the model, the fan will switch from trickle (if selected) to boost (medium or high) via the pullcord/ light switch/humidity sensor/PIR.

All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.

Supply voltage 220-240V/1/50Hz.

Product Downloads

Installation Instructions

Catalogue Pages

Other Documents

Accessories