SDX EC (EuroSeries) Inline Centrifugal Duct Fan 315mm

  • Available in sizes 125 to 315mm
  • EC Motor, backward curved impeller
  • Protected to IPX2
  • Mounting for internal use
  • Integral speed setting potentiometer
  • 0-10v potentiometer speed controllable
  • Operating temperatures from -25°C up to +60°C
  • Quality Assurance to BS EN ISO 9001:1994
  • 2 Year Warranty
/sdx%20ec.jpg

Product Overview

Ventilation Type
Commercial Ventilation
Sector
Commercial
Product Range
SDX EC (EuroSeries)
Ducting/Connection Size
315mm

The SDX EC Euroflow in-line centrifugal duct fans are designed around an efficient backward curved centrifugal impeller and EC motor to ensure a compact and efficient unit, providing high performance and controllability as standard. The in-line fan casing is constructed from epoxy coated pressed steel and incorporates an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit while maintaining minimum noise levels. All models are supplied with a simple mounting foot for ease of installation.

The SDX EC range is available in five model sizes: 125, 150, 200, 250 & 315mm diameter as standard performance. The range provides a performance up to 0.36m³/s with a maximum pressure development of 600 Pa. The SDX EC range is suitable for the extraction of clean air only. It is not suitable for extracting or transporting grinding dust, soot, explosive or other aggressive gases etc.

Impellers
All SDX EC units feature an energy efficient, Class 1, EC/DC external rotor motor and backward curved impeller assembly specifically chosen for performance and non-overloading characteristics. The assembly is dynamically balanced to DIN ISO 1940 Grade 6.3, IP44 according to BS EN 60529.

Ball bearings are greased for life. Insulation is Class ‘B’ (from -25°C to +60°C). All models incorporate internal electronic overload protection and soft start function.

Control
Every SDX EC unit is fitted with a integral commissioning potentiometer giving the ability to set the exact duty required at commissioning. Alternatively, the integral potentiometer can be bypassed to allow remote speed control via an external 0-10V potentiometer.

Terminal Box
An IP55 terminal box fitted to the casing with multiple cable entry positions.

Performance
The fan characteristic curves were determined in accordance with EN ISO 5801. The sound levels were determined in accordance with DIN 45635 resp. ISO 3744 at a distance of 1m from the fan.

Quality Assurance
Design and manufacture is in accordance with the standard for quality management systems BS EN ISO 9001:1994.

Product Downloads

Installation Instructions

Catalogue Pages

Accessories

/VA_Duct_Air_Heater.jpeg
Duct Air Heater 4kW / 8kW 315mm Single Phase
  • Supply and extract fan outputs
  • Combined temperature and airflow sensor
  • Run on timer
  • Solid state switching - no mechanical switching breakdown
  • Indicators for control status
  • High temperature limit and manual reset
  • Separate supply and extract fan outputs for heaters
    over 150mm diameter
/VA_Sonex_Attenuator.jpg
Circular Attenuator 600mm Length 315mm
  • Low cost - exceptional performance
  • Ex stock availability
  • Sheet steel casing and end plates
  • 30 minute fire rating as standard
  • Fitted spigot for direct connection to circular ductwork
/VA_Sonex_Attenuator.jpg
Circular Attenuator 900mm Length 315mm
  • Low cost - exceptional performance
  • Ex stock availability
  • Sheet steel casing and end plates
  • 30 minute fire rating as standard
  • Fitted spigot for direct connection to circular ductwork
/VA_Sonex_Attenuator.jpg
Circular Attenuator 1200mm Length 315mm
  • Low cost - exceptional performance
  • Ex stock availability
  • Sheet steel casing and end plates
  • 30 minute fire rating as standard
  • Fitted spigot for direct connection to circular ductwork
/VA_Unitex_Wall_Terminal.jpeg
Unitex Wall Terminal Standard Louvre 315mm Diameter, 280mm Length
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm
/VA_Unitex_Wall_Terminal.jpeg
Unitex Wall Terminal Standard Louvre 315mm Diameter, 80mm Length
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm