Sabre Sickle Short Case Fan Three Phase 4 Pole 450mm

  • Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance
  • One shot die cast impeller, dynamically balanced for smoother operation
  • Operating temperature up to 70%
  • External Rotor Motors on all models for compact efficient design
  • All models speed controllable
  • Guards fitted as standard on all models
  • Thermal Overload Protection for motor protection
  • Maintenance free sealed for life bearings
  • 2 Year Guarantee
/VA_Sabre_Sickle_Short_Case_Range.jpg

Product Overview

Ventilation Type
Commercial Ventilation
Sector
Commercial
Product Range
VSC (Sabre Sickle Short Case Fans)
Ducting/Connection Size
451mm
IP Rating
IP54

The latest generation of the Vent-Axia Sabre® Sickle Short Case fans incorporate the very latest FE2 Owlett impeller offering improved performance over the previous ranges with up to 7dB(A) reduction in sound and up to 15% improvement in efficiency ensuring the best available fan performance in its class. The advanced blade design is matched to a purpose designed external rotor motor to ensure unrivalled reliability and controllability.

Design and Development
Using a combination of NASA research into wing
performance and winglets, coupled with a study of bird flight has enabled the development of the best available Sickle blade profile. Matching this to a purpose designed close fitting casing ensures best use of this blade technology thereby reducing noise and improving the performance in cased axial fans.

Construction
The Sabre® Sickle Short Case fan range share the same case lengths as the Euroseries Cased axial range making them fully interchangeable and compatible with the full range of Vent-Axia Accessories. The strong and compact short case is constructed from rolled steel plate and protected with a tough, epoxy paint finish. Casing dimensions are to DIN 24151 and flange dimensions are to ISO 6580.

Manufacture is controlled to BS EN ISO 9001. The compact motor/impeller unit is robustly supported within the casing by electro welded and epoxy coated steel rod mounting supports for ease of installation and service access. Suitable for all outdoor weather environments.
Impellers
The motors and impellers are factory matched, statically and dynamically balanced to ISO 1940, part 1Quality Class G.6.3.

Impellers
The impellers incorporate the latest in Sickle blade aerofoil technology to ensure minimum sound and maximum performance. Impellers up to 400mm diameter are moulded from a composite polymer, impellers above this size are Aluminium. The motors and impellers are factory matched, statically and dynamically balanced to ISO 1940 part 1, Quality Class G.6.3.

Motors
The external rotor motors are specifically designed and styled for this range of fan. Ball bearings are greased for life. Sizes 315 - 710 are protected to IP54, against dust and moisture complying with BS EN 60529.

They have ribbed aluminium body castings for efficient cooling with Motor insulation to Class 'F' (from -40°C to + 70°C). Speed controlled sizes 450 to 710 6 & 8 pole motors are only suitable for operating temperatures of up to 40'C.

Electrical
The Sabre® Sickle Short Case fan range is available for either single phase 220-240V 50 Hz capacitor start and run or three phase 380-415V 50Hz. Motors are fitted with Thermal Overload Protection which should be wired into all controller circuits and into starter contactors to prevent motor damage due to overloading / overheating.

Speed Control
Units are suitable for speed control by either electronic, voltage reduction or frequency inverters where permissible. For optimum efficiency and controllability Vent-Axia recommend the use of the eDemand Inverter Controller to give close control via sensors or manual control.

Forms of Running

Cased mounted fans (ex-stock) are supplied for extract use (Form 'B' running).

Performance
The fan performance, is in accordance with tests to ISO 5801.

Sound Levels
Fan sound levels, measured in a reverberant chamber in accordance with ISO 3744 Part 1. Published dB(A) figures are free field sound pressure levels at 3m with spherical propagation at a reference level of 2 x 10-5Pa (20 micro-Pascal). The sound power level spectra figures are dB with a reference level of 10-12 Watts (1 pico-watt).

To ensure minimum noise levels during speed control, either an auto transformer or eDemand inverter speed control is recommended.

Accessories
A full range of accessories is available with the Sabre® Sickle Short Case fans:
- Electronic Speed Controllers
- Auto Transformer Speed Controllers
- eDemand Inverter Speed Control
- D.O.L. Starters
- AnciIlary Packs
- Attenuators

Product Downloads

Installation Instructions

Catalogue Pages

Other Documents

Accessories

/VA_eDemand_Inverter.webp
eDemand Voltage Controller Three Phase 5 Amp
  • Demand ventilation control for A/C speed controllable fans
  • Quick start-up by pre-programmed modes
  • IP54 rated
  • Total motor protection using thermistor connection
  • LCD multifunction display
  • 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
  • CO2 Control
  • Temperature control
  • Constant pressure control
  • Manual remote speed adjuster (0-20mA)
/VA_eDemand_Inverter.jpg
eDemand Frequency Inverter Three Phase 2.5 Amp
  • Demand ventilation control for A/C speed controllable fans
  • Quick start-up by pre-programmed modes
  • IP54 rated
  • Total motor protection using thermistor connection
  • LCD multifunction display
  • 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
  • CO2 Control
  • Temperature control
  • Constant pressure control
  • Manual remote speed adjuster (0-20mA)