Long Cased Axial Fan Three Phase 4 Pole 12deg 450mm

  • Motors protected to IP55
  • Motor insulation Class ‘F’
  • Maximum ambient temp. 54˚C
  • Most models speed controllable via transformer or inverter
  • IP55 terminal box
  • Adjustable factory set polypropylene impeller
  • Suitable for relative humidity levels up to 95% R.H
  • Manufactured to BS EN ISO 9001
  • Performance tested to BS 848 parts 1, 2 and ISO 5801
  • 2 Year Guarantee
/VA_LCA.jpeg

Product Overview

Ventilation Type
Commercial Ventilation
Sector
Commercial
Product Range
LCA (Long Cased Axial Fan)
IP Rating
IP55

The Long Case Axial range of fans incorporates manually adjustable pitch impellers which provide a comprehensive range of duties offering high performance and pressure characteristics.

Available in thirteen sizes ranging from 250 to 1250mm diameter and performances from 0.24m3/s to 36m3/s with pressure development up to 1500Pa. The casing is constructed from rolled steel plate complete with flanges and protected with a tough, galvanised finish.

The Long Case Axial range has a range of accessories available which include: Axial Ancillary Pack, Attenuators, Mounting Feet, Wire Inlet Guard, Coupling Flange & Speed Controllers.

Sound Levels
All measurements of the sound that the fans generate have been taken strictly in accordance with BS 848 part 2, test method 1. Published sound power level spectra figures are dBW with a reference of 10-12 Watts (1 Pico watt).

Motors
The motors are specially selected for optimum performance and efficiency. Ball bearings are greased for life and allow the fan to be installed at any angle. Suitable for continuous operation in relative humidity up to 95%. Motors are protected to IP55 against dust and water jets complying with BS EN 60529. They have ribbed aluminium body castings for efficient cooling. Motor insulation is Class 'F' (from -35°C to +54°C). Star/delta starting is recommended for motor output above 7.5kW.

Axial Impellers
Polypropylene impeller blades are clamped in a split cast aluminium hub, with a keywayed mild steel insert enabling positive locking of the impeller assembly to the motor shaft, this also allows manual adjustment of the pitch angle giving a wide selection of performance details.

Terminal Box
To IP55, protected against dust and water jets from any angle, allowing outside applications.

Declaration of Conformity
All models are supplied with an EC Declaration of Conformity as defined by the EC Council Directive on Machinery 98/37/EC. This declares that all the models, on the basis of their design and construction in the form brought onto the market by Vent-Axia, are in accordance with the Machinery Directive.

Electrical
Single phase 220-240V 50 Hz permanent capacitor. Three phase 380-415V 50Hz. Protection of the motor must be provided by an overload current sensing device (eg. D.O.L Starter or Star/Delta starter where appropriate) or the guarantee will be invalidated. All models are available with 4 pole motors for 250 up to 1250mm diameter with additional 2 pole motors available from 250 up to 630mm diameter.

All units are manufactured to order with 7 working days delivery (UK mainland)

Product Downloads

Installation Instructions

Catalogue Pages

Accessories