Lo-Carbon T-Series Window Fan

• Reduces your carbon footprint
• Extract/intake model in 2 sizes: 9” and 12”
• Long life Lo-Carbon motor lasts twice as long as conventional motors
• Up to 70% energy saving
• Wired or Wireless fan models available
• Easy fit connector Top Socket, standard on all models

Select a product

UK’s No. 1 Commercial Fan

The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.

Window Fan

The fitting kit is designed for installation through single or double glazing and material up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Alternatively, the Lo-Carbon T-Series range can be used in conjunction with Vent-Axia ventilation accessories in flexible and rigid ducting systems to suit individual requirements. It can also be mounted in a fixing plate on walls or above ceilings.

Instantaneous Shutter

With energy saving in mind, units are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. It operates on both extract and intake and at any angle of mounting.

The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum back draught protection. When the fan is used with the Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

Lo-Carbon T-Series Controller

Lo-Carbon Controller LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors.

Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
 

 

PERFORMANCE:

Model Extract m3/h (Low) Extract m3/h (Med) Extract m3/h (High) Watts (high) Sound dB(A) Amps @240V
Lo-Carbon TX9WW Wireless 322 571 761 30.8 40 0.35
Lo-Carbon TX9WW Wired 322 571 761 30.8 40 0.35
Lo-Carbon TX12WW Wireless 660 1295 1550 68.6 46 0.73
Lo-Carbon TX12WW Wired 660 1295 1550 68.6 46 0.73

DIMENSIONS:

Size A B C D E F Fixing Hole Weight kg
230mm 39 150 304 302 19 54 260 5.35
300mm 41 177 381 378 19 54 337 7.74
 
Image of Lo-Carbon TX9WW Wireless
Lo-Carbon TX9WW Wireless
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX9WW
Lo-Carbon TX9WW
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX12WW Wireless
Lo-Carbon TX12WW Wireless
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX12WW
Lo-Carbon TX12WW
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.
Image of Wire-less Control
Wire-less Control
Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.
Please call 0344 856 0590 for further availability information.
Image of LoWatt T-Series Wired Controller
LoWatt T-Series Wired Controller

LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.

Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor
Ambient Response Humidity Sensor
The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). European Patent No: 2298057 Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor
Ecotronic Humidity Sensor

An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Features & Benefits: Ambient operating temp range 0°C to +40°C. BEAB Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Maximum switching load 1 amp inductive. Pullcord override indicated by lamp. Setting Range: 65% - 90%RH. Supply voltage 220-240V/1/50Hz. 

Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits: Adjustable timer overrun (5-25 minutes). Ambient operating temperature range 0°C to +50°C. Designed to meet IP43. Double insulated. Fits any UK single gang mounting box. Internal use only. Maximum load: 600W inductive. Not suitable for use with lighting. No switched live required for internal rooms and toilets. Range of detection up to 10 metres. Supply voltage 220-240V/1/50Hz. Volt-free contacts. Downloads Catalogue Pages

Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

UK’s No. 1 Commercial Fan

The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.

Window Fan

The fitting kit is designed for installation through single or double glazing and material up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Alternatively, the Lo-Carbon T-Series range can be used in conjunction with Vent-Axia ventilation accessories in flexible and rigid ducting systems to suit individual requirements. It can also be mounted in a fixing plate on walls or above ceilings.

Instantaneous Shutter

With energy saving in mind, units are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. It operates on both extract and intake and at any angle of mounting.

The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum back draught protection. When the fan is used with the Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

Lo-Carbon T-Series Controller

Lo-Carbon Controller LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors.

Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
 

 

Technical

PERFORMANCE:

Model Extract m3/h (Low) Extract m3/h (Med) Extract m3/h (High) Watts (high) Sound dB(A) Amps @240V
Lo-Carbon TX9WW Wireless 322 571 761 30.8 40 0.35
Lo-Carbon TX9WW Wired 322 571 761 30.8 40 0.35
Lo-Carbon TX12WW Wireless 660 1295 1550 68.6 46 0.73
Lo-Carbon TX12WW Wired 660 1295 1550 68.6 46 0.73

DIMENSIONS:

Size A B C D E F Fixing Hole Weight kg
230mm 39 150 304 302 19 54 260 5.35
300mm 41 177 381 378 19 54 337 7.74
 

Models

Image of Lo-Carbon TX9WW Wireless
Lo-Carbon TX9WW Wireless
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX9WW
Lo-Carbon TX9WW
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX12WW Wireless
Lo-Carbon TX12WW Wireless
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon TX12WW
Lo-Carbon TX12WW
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Please call 0344 856 0590 for further availability information.

Accessories

Image of Wire-less Control
Wire-less Control
Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.
Please call 0344 856 0590 for further availability information.
Image of LoWatt T-Series Wired Controller
LoWatt T-Series Wired Controller

LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.

Please call 0344 856 0590 for further availability information.
Image of Ambient Response Humidity Sensor
Ambient Response Humidity Sensor
The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). European Patent No: 2298057 Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Ecotronic Humidity Sensor
Ecotronic Humidity Sensor

An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Features & Benefits: Ambient operating temp range 0°C to +40°C. BEAB Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Maximum switching load 1 amp inductive. Pullcord override indicated by lamp. Setting Range: 65% - 90%RH. Supply voltage 220-240V/1/50Hz. 

Please call 0344 856 0590 for further availability information.
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Please call 0344 856 0590 for further availability information.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits: Adjustable timer overrun (5-25 minutes). Ambient operating temperature range 0°C to +50°C. Designed to meet IP43. Double insulated. Fits any UK single gang mounting box. Internal use only. Maximum load: 600W inductive. Not suitable for use with lighting. No switched live required for internal rooms and toilets. Range of detection up to 10 metres. Supply voltage 220-240V/1/50Hz. Volt-free contacts. Downloads Catalogue Pages

Please call 0344 856 0590 for further availability information.

Downloads