Lo-Carbon T-Series 12 inch Wired Roof Fan

  • Long life Lo-Carbon motor lasts twice as long as conventional motors
  • Reduces your carbon footprint
  • Extract/intake model in 2 sizes: 9" and 12"
  • Up to 70% energy saving
  • Easy fit connector Top Socket, standard on all models
  • Works with Wired Controller

Product Overview

Ventilation Type
Commercial Ventilation
Product Range
Lo-Carbon T-Series Roof

UK’s No. 1 Commercial Fan

The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.

Panel Fitting Kit

Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.

Instantaneous Shutter

With energy saving in mind, Lo-Carbon T-Series models are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. With a Lo-Carbon T-Series Controller the fan will operate on both extract and intake, suitable for any angle of mounting. When the fan is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.


Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with self resetting Standard Thermal Overload Protection (S.T.O.P). Supply voltage: 220-240V/1/50Hz.

Easy Cleaning

Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.

Product Downloads

Installation Instructions

Catalogue Pages


Visionex PIR
  • Fits any UK single gang mounting box
  • Adjustable timer overrun (5-25 minutes)
  • Range detection up to 10 metres
  • Designed to meet IP43
  • Ambient operating temperature range 0 - 50°C
Ecotronic Humidity Sensor
  • Setting range 65% - 90%RH
  • Maximum switching load 1 Amp inductive
  • Pullcord override indicated by lamp
  • Ambient operating temperature 0°C to +40°C
  • Dimensions: 87 x 87 x 33mm. (H x W x D)
  • Dimensions: 87 x 87 x 33mm. (H x W x D)
Ambient Response Humidity Sensor
  • Pullcord override and indication light
  • Changeover relay switch
  • Operating range 30% - 90%RH
  • Ambient operating temperature 5°C to 40°C
  • 220-240V AC
  • Fits single fang box for surface mounting