Lo-Carbon Sentinel Kinetic FH (Left Handed)

  • Acoustic Enclosure option for reduced breakout noise
  • Acoustic Top Box option for reduced in-duct noise
  • Horizontal duct option for space-saving installations
  • Integrated digital controller for simple and accurate commissioning
  • Plug and play controls; Humidistat, Wireless Remote
  • BMS connectivity
  • LS Input (Light Switch)
  • Self Diagnosis for simplieid fault finding
  • Adjustable delay On/ delay Off timer
/VA_Sentinel_Kinetic_FH_Range.jpg

Product Overview

Ventilation Type
Mechanical Ventilation Heat Recovery (MVHR)
Sector
New Build
Product Range
Lo-Carbon Sentinel Kinetic FH
Ducting/Connection Size
125mm
IP Rating
IP22

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space or in an appropriate cupboard within the dwelling. When mounted in an unheated area the ducting and unit must be insulated in accordance with the Domestic Ventilation Compliance Guide. Ducting can be attached to the unit horizontally, vertically or both.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Left (L) or right (R) hand installation. Left hand and right hand units are
available.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied.

The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

This product is available with acoustic enclosure.

Accessories

/VA_PIR_Sensor.jpg
Visionex PIR
  • Fits any UK single gang mounting box
  • Adjustable timer overrun (5-25 minutes)
  • Range detection up to 10 metres
  • Designed to meet IP43
  • Ambient operating temperature range 0 - 50°C
/VA_Acoustic_Purge_Ventilator_Range.jpg
Acoustic Residential Purge Ventilator
  • Rapid local extract
  • Satisfies Part F purge requirements
  • Acoustically treated for low noise
  • Helps to reduce overheating
  • Can be used in conjunction with MVHR or MEV units or as a standalone system
  • 220 x 90mm or 250mm Diameter spigots
  • Low Profile design
  • Energy efficient EC fan
  • Vaiable speed control
/VA_Acoustic_Purge_Ventilator_Range.jpg
Acoustic Residential Purge Ventilator XL
  • Rapid local extract
  • Satisfies Part F purge requirements
  • Acoustically treated for low noise
  • Helps to reduce overheating
  • Can be used in conjunction with MVHR or MEV units or as a standalone system
  • 220 x 90mm or 250mm Diameter spigots
  • Low Profile design
  • Energy efficient EC fan
  • Vaiable speed control