Lo-Carbon Sentinel Kinetic BH Left with Acoustic Enclosure & Top Box

  • Recognised in SAP PCDB
  • Lightweight for easier installation
  • Horizontal duct option for space-saving installations
  • Fits within a 290mm deep kitchen cupboard
  • Integrated digital controller for simple and accurate commissioning
  • Plug and play control; Humidistat
  • BMS connectivity
  • LS inputs (Light Switch)
  • Horizontal duct options
  • Acoustic Enclosure & Top Box options
/VA_LC_Sentinel_Kinetic_BH_Enc_TB_Range.tif

Product Overview

Ventilation Type
Mechanical Ventilation Heat Recovery (MVHR)
Sector
New Build
Product Range
Lo-Carbon Sentinel Kinetic BH
Ducting/Connection Size
125mm
IP Rating
IP22

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simplyremoving the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution
This product is available with acoustic enclosure.

Product Downloads

Accessories

/VA_Acoustic_Purge_Ventilator_Range.jpg
Acoustic Residential Purge Ventilator
  • Rapid local extract
  • Satisfies Part F purge requirements
  • Acoustically treated for low noise
  • Helps to reduce overheating
  • Can be used in conjunction with MVHR or MEV units or as a standalone system
  • 220 x 90mm or 250mm Diameter spigots
  • Low Profile design
  • Energy efficient EC fan
  • Vaiable speed control
/VA_Acoustic_Purge_Ventilator_Range.jpg
Acoustic Residential Purge Ventilator XL
  • Rapid local extract
  • Satisfies Part F purge requirements
  • Acoustically treated for low noise
  • Helps to reduce overheating
  • Can be used in conjunction with MVHR or MEV units or as a standalone system
  • 220 x 90mm or 250mm Diameter spigots
  • Low Profile design
  • Energy efficient EC fan
  • Vaiable speed control