EuroSeries Roof Fan Three Phase 6 Pole 630mm

  • Cowl & base moulded from recyclable polymeric material
  • All sizes resistant to UV light
  • Sizes 250mm to 1000mm diameter are protected to IP54
  • Optional backdraught shutters and bird guard (250-630mm)
  • All models speed controllable
  • Motor Insulation Class F, -40°C to +70°C operating temperature
  • Most Models Reversible for supply or extract units
  • Thermal overload for motor protection
  • Performance tested to BS848 part 1 1980
  • Designed for Data Centre and Warehouse cooling
/VA_ESR.jpeg

Product Overview

Ventilation Type
Commercial Ventilation
Sector
Commercial
Product Range
ESR (EuroSeries Roof Fan)

A range of extract axial blade industrial roof fans incorporating the Euroseries® ESP axial plate fan, featuring a single shot die cast aluminium blade & external rotor motor design.

Cowl and roof mounting base are moulded from specially formulated recyclable polymeric materials, which are high impact resistant and provide a rigid profile against strong winds and resistance to UV light. Standard colour BS00A05.

EuroSeries® ESR units are suitable for flat or inclined roofs (max. angle 30°) and are designed for either kerb or purlin box mounting.

The EuroSeries® ESR range is available in eleven sizes with the extract performances up to 10.88m³/s, with pressure characteristics of up 300Pa. All units are designed for & fully speed controllable.

Air Operated Shutters & Bird Guards

The shutters fits beneath the cowl using fitting provided. Shutters should not be used when the fan performance is below 30% of maximum and the hinge should point up the roof incline.

The standard shutters for sizes 800 & 1000mm must not be used with 4 & 6 pole unit. Please enquire for special metal shutters. Bird Guards are manufactured to fit neatly between the roof cowl and the base.

Impellers

All sizes are supplied with cast aluminium impellers, ensuring performance when working against outdoor conditions and abrasive airflow. All fans are reversible for Intake (approx 30% reduction in performance). Backdraught shutters should not be used when operated as an intake fan.

Motors

External rotor motors are specially designed and styled for this range of fan. Ball bearings are greased for life. Rotors are dynamically balanced to ISO 1940. Sizes 250-1000mm, motors are protected to IP54, against dust and moisture complying with BS EN 60529:1992. They are ribbed aluminium body castings for efficient cooling. Motor insulation is Class ‘F’ (from -40°C to +70°C).

Electrical

Single phase 220-240V 50Hz. Capacitor start and run. Three phase 380-415V 50Hz. An IP54 terminal box is supplied with most models with 20mm and PGII entry. All motors are fitted with thermal overload protection which should be wired into all controller circuits and into starter contactors. Models are available with either 2,4, 6 & 8 pole motors.

Terminal Box

Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.

Performance

The fan performance is in accordance with tests to BS848 Part 1 1980.

Sound Levels

Fan sound levels, measured in a reverberant chamber in accordance with BS848 Part 2 1985. Published dB(A) figures are free field sound pressure levels at 3m with spherical propagation at a reference level of 2 x 10-5 Pa (20 micro-Pascal). The sound power level spectra figures are dB with reference level of 10-12 Watts (1 pico-watt). To ensure minimum noise levels during speed control, an auto transformer speed control is recommended.

Product Downloads

Installation Instructions

Catalogue Pages

Accessories

/VA_eDemand_Inverter.jpg
eDemand Frequency Inverter Three Phase 2.5 Amp
  • Demand ventilation control for A/C speed controllable fans
  • Quick start-up by pre-programmed modes
  • IP54 rated
  • Total motor protection using thermistor connection
  • LCD multifunction display
  • 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
  • CO2 Control
  • Temperature control
  • Constant pressure control
  • Manual remote speed adjuster (0-20mA)