ACQ In-Line Single Phase 4 Pole 500mm
- Acoustically treated housing, Class ‘O’ rated, sandwich construction selected for maximum noise absorption
- Motors protected to IP44
- Motor insulation Class ‘B’
- Maximum operating temperature 50˚C
- Standard Thermal Overload Protection
- Aluzinc construction for internal or external mounting as standard
- All models speed controllable
- Manufacture controlled to BS EN 1S0 9001
- Performance tested to ISO 5801
Product Overview
The ACQ fans feature an acoustic foam of dual density sandwich construction specially selected for maximum sound absorption and quiet operation. The housing is designed to be as compact as possible for concealed false ceiling applications.
Manufactured in Aluzinc sheet metal, with integral anchorage points to allow the fan to be suspended at any angle, via drop rods or anti vibration mounts, ensuring a quick and easy solution to installation of the in-line acoustic fans. The access panel is easily removed for inspection.
The full range of Acoustic fans manufactured from Aluzinc and as such are suitable for both internal and external mounting as standard.
Ten models are available in sizes 100, 125, 150, 160, 200, 250, 315, 400 and 500, providing air volumes from 0.075m3/s to 1.609m3/s (270m3/h to 5,792 m3/h) at free air. Designed for pressures up to 550 Pa.
Motors
At the heart of the range is a proven external rotor motor and backward curved impeller selected for low noise and high efficiency impeller assembly specially selected for its performance. The assembly is dynamically balanced to ISO 1940. Motors are rated to IP44 according to BS EN 60529. Ball bearings are greased for life and allow the fan to run at any angle. Insulation is Class ‘B’ (from -15˚C to +50˚C).
All Acoustic fans are suitable for speed control with either an Electronic or Auto Transformer. An Auto Transformer is recommended to ensure minimum noise levels during speed control so eliminating any possibility of motor harmonic noise.
Terminal Box
An IP54 Terminal Box is supplied with all models with 20mm cable gland entry.
Sound and Performance
Tested to ISO5801. Published dB(A) figures are free field sound pressure levels at 3m with spherical propagation at a reference level of 2 x 10–5Pa (20 micro-Pascal). The inlet, outlet and breakout sound power level spectra figures are dB with a reference of 10–12 Watts (1 pico-watt).
Electrical
The ACQ range is supplied with motors wound to suit a 230V/1ph/50Hz supply capacitor start and run.
Quality Assurance
Design and manufacture is in accordance with BS EN ISO 9001.
Product Downloads
Installation Instructions
Catalogue Pages
Other Documents
Accessories
Duct Air Heater 21kW 500mm Three Phase
- Supply and extract fan outputs
- Combined temperature and airflow sensor
- Run on timer
- Solid state switching - no mechanical switching breakdown
- Indicators for control status
- High temperature limit and manual reset
- Separate supply and extract fan outputs for heaters
over 150mm diameter
eDemand Voltage Controller Single Phase 6 Amp
- Demand ventilation control for A/C speed controllable fans
- Quick start-up by pre-programmed modes
- IP54 rated
- Total motor protection using thermistor connection
- LCD multifunction display
- 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
- CO2 Control
- Temperature control
- Constant pressure control
- Manual remote speed adjuster (0-20mA)
eDemand Frequency Inverter Single Phase 4 Amp
- IP54 Enclosure
- eDemand compatible
- Single & Three Phase models
- Adjustable duty/share timer
- Automatic changeover (Fan Fail)
- Fan failure alarm contacts
Electronic Speed Controller With Thermal Contact Single Phase 6 Amp
- Infinitely variable speed control
- Automatic supply voltage detection
- Adjustable stepless output voltage
- 230 VAC alarm output
- TK monitoring for thermal motor protection
- Contacts for remote on/off switching
- Adjustable minimum and maximum speed limits
- Kick start (default) or soft start
- Run and fault detection LED indication