- Infinitely variable speed control
- Automatic supply voltage detection
- Adjustable stepless output voltage
- 230 VAC alarm output
- TK monitoring for thermal motor protection
- Contacts for remote on/off switching
- Adjustable minimum and maximum speed limits
- Kick start (default) or soft start
- Run and fault detection LED indication
Product Search Results
75 matching products found (showing 1 - 15)
- 1.5 Amp
- Can be flush fitted when used with a flush fitting box
- Radio supressed to BS EN 55014
- 3 Speed Settings
- Infra-Red remote control
- Soft touch control
- 8 hour timer
- Oscillation & free neck
- Turns on Towel Rail for 30 minutes before defaulting to user setting
- Six stage air purifier including a medical grade H13 HEPA filter
- Removes 99.9% of airborne particles including COVID-19, viruses and bacteria
- UV sterilisation and Ionizer built in
- Quiet, multi speed operation
- Child safety lock
- Filter replacement indication
- Quality is assured with a two-year warranty
- TÜV SÜD approved
- Includes Type G British 3-pin Electrical Plug
- External weather louvre, wall sleeve and duct connection spigot in one unit
- Satin anodised louvre gives full weather protection
- Epoxy powder coated finish, weather louvre available as optional extra
- 280mm or 80mm wall sleeve section
- Spigot connections from 100mm to 400mm
- External weather louvre, wall sleeve and duct connection spigot in one unit
- Satin anodised louvre gives full weather protection
- Epoxy powder coated finish, weather louvre available as optional extra
- 280mm or 80mm wall sleeve section
- Spigot connections from 100mm to 400mm
- External weather louvre, wall sleeve and duct connection spigot in one unit
- Satin anodised louvre gives full weather protection
- Epoxy powder coated finish, weather louvre available as optional extra
- 280mm or 80mm wall sleeve section
- Spigot connections from 100mm to 400mm
- Infinitely variable speed control
- Automatic supply voltage detection
- Adjustable stepless output voltage
- 230 VAC alarm output
- Contacts for remote on/off switching
- Adjustable minimum and maximum speed limits
- Kick start (default) or soft start
- Controller with sensor mode, allows a range of sensors to be used in conjunction with the HR500 units
- Separate starter not required when used with HOT SPOT protected fan (SPTK only)
- Compact and easy to install
- Suitable for surface or flush mounting (SP5010 surface only)*
- SP type include ON/OFF switch with neon indicator
- SPTK type include ON/OFF/RESET switch and indication light fan trip indicator and built in facility for manual reset
- Complies with required statutory regulations and carries CE mark
- Demand ventilation control for A/C speed controllable fans
- Quick start-up by pre-programmed modes
- IP54 rated
- Total motor protection using thermistor connection
- LCD multifunction display
- 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
- CO2 Control
- Temperature control
- Constant pressure control
- Manual remote speed adjuster (0-20mA)