Trakmaster Twin Fan Controllers

Select a product

The Trakmaster range of intelligent Vent-Axia twin fan controllers has been designed to offer total flexibility and controlled interface with BMS (Building Management Systems) saving installation costs, and providing energy management/night setback facility.

Maximum Load : 9 Amps on single or three phase

Image of ITC - Trakmaster Twin Fan Control
ITC - Trakmaster Twin Fan Control
The range of intelligent Vent-Axia twin fan controllers has been designed to offer total flexibility and controlled interface with BMS (Building Management Systems) saving installation costs, and providing energy management/night setback facility Provides automatic changeover on fan failure as well as enabling a manual selection of either fan for duty sharing or test purposes. (BMS compatible via volt free contacts). This controller must have a permanent live supply. Any On/Off switching must be via the sensor connections S1 and SG terminals. PLEASE NOTE: THE ITC CONTROLLERS MAY BE USED IN CONJUNCTION WITH A 5-STEP AUTO TRANSFORMER SPEED CONTROLLER TO MEET THE REQUIRED DESIGN CRITERIA. Features & Benefits: Extra Low Voltage Twin Fan control system, designed to save installation costs. For use with most Vent-Axia twin fan. Fully BMS compatible with optional controllers. Maximum load: 9 amps on single or three phase. Night setback facility - saves energy. Remote run/failure controller with fan status display. Saves installation costs using ELV low cost wiring. Speed control of all Vent-Axia twin fans.
Please call 0344 856 0590 for further availability information.
Image of ITC - DS - Trakmaster Twin Fan Control - Duty Sharing
ITC - DS - Trakmaster Twin Fan Control - Duty Sharing
The range of intelligent Vent-Axia twin fan controllers has been designed to offer total flexibility and controlled interface with BMS (Building Management Systems) saving installation costs, and providing energy management/night setback facility Incorporates a timing mechanism which operates alternate fans on 12 or 24 hour intervals, thus ensuring the extended life of the fan bearings. The controller also provides automatic changeover on fan failure along with the facility for manual selection of either fan. (BMS compatible via volt free contacts). This controller must have a permanent live supply. Any On/Off switching must be via the sensor connections S1 and SG terminals. PLEASE NOTE: THE ITC CONTROLLERS MAY BE USED IN CONJUNCTION WITH A 5-STEP AUTO TRANSFORMER SPEED CONTROLLER TO MEET THE REQUIRED DESIGN CRITERIA. Features & Benefits: Extra Low Voltage Twin Fan control system, designed to save installation costs. For use with most Vent-Axia twin fan. Fully BMS compatible with optional controllers. Maximum load: 9 amps on single or three phase. Night setback facility - saves energy. Remote run/failure controller with fan status display. Saves installation costs using ELV low cost wiring. Speed control of all Vent-Axia twin fans.
Please call 0344 856 0590 for further availability information.
Image of RSC - Remote Setback Control
RSC - Remote Setback Control
The RSC multi-speed control system offers 2 speed fan versatility eg. Energy Management for night-time setback. Can be used in conjunction with Vent-Axia ITC, ITC-DS controllers using 5 step auto-transformer speed controllers for speed selection. Uses 24V output from ITC controller. Dimensions: 86mm x 178mm x 100mm (Width x Height x Depth)
Please call 0344 856 0590 for further availability information.
Image of Remote Visual Indicator (RVC)
Remote Visual Indicator (RVC)
Wired in conjunction with either an ITC or ITC-DS controller the RVC can be located up to 100m away using low cost ELV wiring. The compact, single gang RVC ELV (Extra Low Voltage) remote visual controller indicates status of Fan 1 and Fan 2 with status/warning lights. Push button allows Fan 1 and Fan 2 with standby (Off) to be selected.
Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The Trakmaster range of intelligent Vent-Axia twin fan controllers has been designed to offer total flexibility and controlled interface with BMS (Building Management Systems) saving installation costs, and providing energy management/night setback facility.

Maximum Load : 9 Amps on single or three phase

Technical

Models

Image of ITC - Trakmaster Twin Fan Control
ITC - Trakmaster Twin Fan Control
The range of intelligent Vent-Axia twin fan controllers has been designed to offer total flexibility and controlled interface with BMS (Building Management Systems) saving installation costs, and providing energy management/night setback facility Provides automatic changeover on fan failure as well as enabling a manual selection of either fan for duty sharing or test purposes. (BMS compatible via volt free contacts). This controller must have a permanent live supply. Any On/Off switching must be via the sensor connections S1 and SG terminals. PLEASE NOTE: THE ITC CONTROLLERS MAY BE USED IN CONJUNCTION WITH A 5-STEP AUTO TRANSFORMER SPEED CONTROLLER TO MEET THE REQUIRED DESIGN CRITERIA. Features & Benefits: Extra Low Voltage Twin Fan control system, designed to save installation costs. For use with most Vent-Axia twin fan. Fully BMS compatible with optional controllers. Maximum load: 9 amps on single or three phase. Night setback facility - saves energy. Remote run/failure controller with fan status display. Saves installation costs using ELV low cost wiring. Speed control of all Vent-Axia twin fans.
Please call 0344 856 0590 for further availability information.
Image of ITC - DS - Trakmaster Twin Fan Control - Duty Sharing
ITC - DS - Trakmaster Twin Fan Control - Duty Sharing
The range of intelligent Vent-Axia twin fan controllers has been designed to offer total flexibility and controlled interface with BMS (Building Management Systems) saving installation costs, and providing energy management/night setback facility Incorporates a timing mechanism which operates alternate fans on 12 or 24 hour intervals, thus ensuring the extended life of the fan bearings. The controller also provides automatic changeover on fan failure along with the facility for manual selection of either fan. (BMS compatible via volt free contacts). This controller must have a permanent live supply. Any On/Off switching must be via the sensor connections S1 and SG terminals. PLEASE NOTE: THE ITC CONTROLLERS MAY BE USED IN CONJUNCTION WITH A 5-STEP AUTO TRANSFORMER SPEED CONTROLLER TO MEET THE REQUIRED DESIGN CRITERIA. Features & Benefits: Extra Low Voltage Twin Fan control system, designed to save installation costs. For use with most Vent-Axia twin fan. Fully BMS compatible with optional controllers. Maximum load: 9 amps on single or three phase. Night setback facility - saves energy. Remote run/failure controller with fan status display. Saves installation costs using ELV low cost wiring. Speed control of all Vent-Axia twin fans.
Please call 0344 856 0590 for further availability information.

Accessories

Image of RSC - Remote Setback Control
RSC - Remote Setback Control
The RSC multi-speed control system offers 2 speed fan versatility eg. Energy Management for night-time setback. Can be used in conjunction with Vent-Axia ITC, ITC-DS controllers using 5 step auto-transformer speed controllers for speed selection. Uses 24V output from ITC controller. Dimensions: 86mm x 178mm x 100mm (Width x Height x Depth)
Please call 0344 856 0590 for further availability information.
Image of Remote Visual Indicator (RVC)
Remote Visual Indicator (RVC)
Wired in conjunction with either an ITC or ITC-DS controller the RVC can be located up to 100m away using low cost ELV wiring. The compact, single gang RVC ELV (Extra Low Voltage) remote visual controller indicates status of Fan 1 and Fan 2 with status/warning lights. Push button allows Fan 1 and Fan 2 with standby (Off) to be selected.
Please call 0344 856 0590 for further availability information.

Downloads

Related Products