Solo - Centrifugal Bathroom / Toilet Fans

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

• 100mm high performance centrifugal extract fan for internal bathrooms, toilets and other small rooms
• High performance 24l/s
• Single speed and overrun timer models
• Suitable for wall, ceiling, panel and window mounting
• Built-in washable filter feature
• PIR version also available
• Suitable for use with flat ducting
• Double insulated
• IPX4 rated

The Solo range of high performance centrifugal extract fans from Vent-Axia have been specifically designed for effective ducted ventilation of internal bathrooms, WC's and other small rooms. Finished in White. The Solo range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the 54m3/h (15 l/s) required by the Building Regulations Document F for ventilation of bathrooms. IP44 Rated.

High air movement capacity and pressure characteristics are the result of a reliable ball bearing shaded pole motor and a unique forward curve impeller developed by Vent-Axia. Detailed attention to airflow management throughout the unit ensures efficient running and quiet operation.

Models are available for surface or recessed mounting directly into standard 100mm diameter ducting. Suitable for panel, wall and ceiling installations and windows up to 25mm thick. For high rise or coastal applications, install through the wall with a Vent Cowl (Stock Ref. No. 56 14 03)

PRODUCT SPECIFICATION:

Electrical
Rear 20mm conduit entry for recessed wiring or side entry grommet for surface wiring. Double insulated appliance.
Enclosure of the electrical components manufactured from flame retardant grade material. Supply voltage 220-240V/1/50Hz.
Window fitting kit Stock Ref. No. 114 61 685A
White wall fitting kit Stock Ref. No. 25 41 02
Brown wall fitting kit Stock Ref. No. 25 41 00
Manufacturers of some fluorescent/low energy lighting systems indicate that these can interfere with other electronic/timing circuits. For reliable operation of these circuits we recommend therefore that a tungsten filament light is used.

PERFORMANCE:

Performance

DIMENSIONS:

To meet IEE Regulations, timer models should be isolated using a 3 pole isolator.
Stock Ref. No. 56 35 18

A B C D E F G
Fan Dims 155 140 36 98Ø 85 55 60
Transformer 175 90 55 30
Weight 1.35kg
Image of Vent-Axia Solo P (Pullcord)
Vent-Axia Solo P (Pullcord)
Single speed 24l/s. Control by pullcord or from light/remote switch or sensor.
Stock Ref. No: 11101010
This Model no longer available
Image of Vent-Axia Solo T (Timer)
Vent-Axia Solo T (Timer)
Single speed 24l/s. Control by light/remote switch. Overrun timer variable from 5 to 30 minutes.
Stock Ref. No: 11101030
This Model no longer available
Image of Vent-Axia Solo TM2 (Timer/PIR)
Vent-Axia Solo TM2 (Timer/PIR)
Control by integral PIR detector. Fan is switched ON when PIR is triggered. Built-in overrun timer, variable from 5 to 30 minutes, switches fan Off.
Stock Ref. No: 11101060
This Model no longer available
Image of Vent-Axia Solo HTP (Humidity/Timer)
Vent-Axia Solo HTP (Humidity/Timer)
Humidity controlled single speed fan with pullcord override. 17 min overrun timer.
Stock Ref. No: 11101080
This Model no longer available

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The Solo range of high performance centrifugal extract fans from Vent-Axia have been specifically designed for effective ducted ventilation of internal bathrooms, WC's and other small rooms. Finished in White. The Solo range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the 54m3/h (15 l/s) required by the Building Regulations Document F for ventilation of bathrooms. IP44 Rated.

High air movement capacity and pressure characteristics are the result of a reliable ball bearing shaded pole motor and a unique forward curve impeller developed by Vent-Axia. Detailed attention to airflow management throughout the unit ensures efficient running and quiet operation.

Models are available for surface or recessed mounting directly into standard 100mm diameter ducting. Suitable for panel, wall and ceiling installations and windows up to 25mm thick. For high rise or coastal applications, install through the wall with a Vent Cowl (Stock Ref. No. 56 14 03)

Technical

PRODUCT SPECIFICATION:

Electrical
Rear 20mm conduit entry for recessed wiring or side entry grommet for surface wiring. Double insulated appliance.
Enclosure of the electrical components manufactured from flame retardant grade material. Supply voltage 220-240V/1/50Hz.
Window fitting kit Stock Ref. No. 114 61 685A
White wall fitting kit Stock Ref. No. 25 41 02
Brown wall fitting kit Stock Ref. No. 25 41 00
Manufacturers of some fluorescent/low energy lighting systems indicate that these can interfere with other electronic/timing circuits. For reliable operation of these circuits we recommend therefore that a tungsten filament light is used.

PERFORMANCE:

Performance

DIMENSIONS:

To meet IEE Regulations, timer models should be isolated using a 3 pole isolator.
Stock Ref. No. 56 35 18

A B C D E F G
Fan Dims 155 140 36 98Ø 85 55 60
Transformer 175 90 55 30
Weight 1.35kg

Models

Image of Vent-Axia Solo P (Pullcord)
Vent-Axia Solo P (Pullcord)
Single speed 24l/s. Control by pullcord or from light/remote switch or sensor.
Stock Ref. No: 11101010
This Model no longer available
Image of Vent-Axia Solo T (Timer)
Vent-Axia Solo T (Timer)
Single speed 24l/s. Control by light/remote switch. Overrun timer variable from 5 to 30 minutes.
Stock Ref. No: 11101030
This Model no longer available
Image of Vent-Axia Solo TM2 (Timer/PIR)
Vent-Axia Solo TM2 (Timer/PIR)
Control by integral PIR detector. Fan is switched ON when PIR is triggered. Built-in overrun timer, variable from 5 to 30 minutes, switches fan Off.
Stock Ref. No: 11101060
This Model no longer available
Image of Vent-Axia Solo HTP (Humidity/Timer)
Vent-Axia Solo HTP (Humidity/Timer)
Humidity controlled single speed fan with pullcord override. 17 min overrun timer.
Stock Ref. No: 11101080
This Model no longer available

Downloads