Sentinel Kinetic FH

• Lightweight for easier installation
• Horizontal duct option for space-saving
installations
• Integrated digital controller for simple
and accurate commissioning
• Plug and play controls; Humidistat,
Ventwise, Wireless Remote
• BMS connectivity
• LS inputs (Light Switch)
• Volt-free inputs
• Self diagnosis for simplified fault finding
• Adjustable delay On/delay Off timer

Select a product

Easy Installation

The Sentinel Kinetic models can be mounted vertically in a roof space or in an appropriate cupboard within the dwelling. When mounted in an unheated area the ducting and unit must be insulated in accordance
with the Domestic Ventilation Compliance Guide. Ducting can be attached to the unit horizontally, vertically or both.
Left (L) or right (R) hand installation. Left hand and right hand units are available.

Spigot Options

The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor

The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

 
Image of Sentinel Kinetic F
Sentinel Kinetic F
A lightweight, easy to install heat recovery unit suitable for apartments and houses.
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic F (Left Handed)
Sentinel Kinetic F (Left Handed)
A lightweight, easy to install heat recovery unit suitable for apartments and houses.
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Please call 0344 856 0590 for further availability information.
Image of Wireless enable kit
Wireless enable kit
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller
Wireless Transmitter Controller
• Additional controller for 441865 and 439352 • A maximum of 4 controllers can be used per system • Can be connected to other accessories (eg Humidistat) to send a boost signal wirelessly
Please call 0344 856 0590 for further availability information.
Image of LED Indicator
LED Indicator
Compatible with the Sentinel Kinetic range, the LED Indicator illuminates when the MVHR unit requires a filter check or if the unit has a fault. Supplied with 15 metres of cable. 85 x 85 x 10mm (H x W x D)
Please call 0344 856 0590 for further availability information.
Image of Trickle Boost Switch
Trickle Boost Switch
A single gang switch to boost from high to low speeds on heat recovery systems. 85 x 85 x 10mm (H x W x D)
Please call 0344 856 0590 for further availability information.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits: Adjustable timer overrun (5-25 minutes). Ambient operating temperature range 0°C to +50°C. Designed to meet IP43. Double insulated. Fits any UK single gang mounting box. Internal use only. Maximum load: 600W inductive. Not suitable for use with lighting. No switched live required for internal rooms and toilets. Range of detection up to 10 metres. Supply voltage 220-240V/1/50Hz. Volt-free contacts. Downloads Catalogue Pages

Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

Overview

Easy Installation

The Sentinel Kinetic models can be mounted vertically in a roof space or in an appropriate cupboard within the dwelling. When mounted in an unheated area the ducting and unit must be insulated in accordance
with the Domestic Ventilation Compliance Guide. Ducting can be attached to the unit horizontally, vertically or both.
Left (L) or right (R) hand installation. Left hand and right hand units are available.

Spigot Options

The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor

The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Technical

 

Models

Image of Sentinel Kinetic F
Sentinel Kinetic F
A lightweight, easy to install heat recovery unit suitable for apartments and houses.
Please call 0344 856 0590 for further availability information.
Image of Sentinel Kinetic F (Left Handed)
Sentinel Kinetic F (Left Handed)
A lightweight, easy to install heat recovery unit suitable for apartments and houses.
Please call 0344 856 0590 for further availability information.

Accessories

Image of Sentinel Kinetic Wired Remote Controller
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Please call 0344 856 0590 for further availability information.
Image of Wireless enable kit
Wireless enable kit
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
Please call 0344 856 0590 for further availability information.
Image of Wireless Transmitter Controller
Wireless Transmitter Controller
• Additional controller for 441865 and 439352 • A maximum of 4 controllers can be used per system • Can be connected to other accessories (eg Humidistat) to send a boost signal wirelessly
Please call 0344 856 0590 for further availability information.
Image of LED Indicator
LED Indicator
Compatible with the Sentinel Kinetic range, the LED Indicator illuminates when the MVHR unit requires a filter check or if the unit has a fault. Supplied with 15 metres of cable. 85 x 85 x 10mm (H x W x D)
Please call 0344 856 0590 for further availability information.
Image of Trickle Boost Switch
Trickle Boost Switch
A single gang switch to boost from high to low speeds on heat recovery systems. 85 x 85 x 10mm (H x W x D)
Please call 0344 856 0590 for further availability information.
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits: Adjustable timer overrun (5-25 minutes). Ambient operating temperature range 0°C to +50°C. Designed to meet IP43. Double insulated. Fits any UK single gang mounting box. Internal use only. Maximum load: 600W inductive. Not suitable for use with lighting. No switched live required for internal rooms and toilets. Range of detection up to 10 metres. Supply voltage 220-240V/1/50Hz. Volt-free contacts. Downloads Catalogue Pages

Please call 0344 856 0590 for further availability information.

Downloads