Lo-Carbon T-Series Roof Models

• Reduces your carbon footprint
• Extract / intake model in 2 sizes: 9” and 12”
• Long life Lo-Carbon motor lasts twice as long as other conventional motors
• Up to 70% energy saving
• Wired or Wireless fan models available
• New easy fit connector Top Socket, standard on all models

Select a product

UK's No. 1 Commercial Fan
Designing ventilation systems with the fan mounted in a skylight or a flat roof is easy. With a low profile cowl, the Lo-Carbon T-Series Roof model is suitable for installation in horizontal, angled and vertical glass and for fixing plates in roofs. For vertical windows or walls in exposed areas and single and double glazing including most types of glass up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets.
Both sizes of Vent-Axia roof plate assemblies can be fitted easily into flat roofs.

Shutter
With energy saving in mind, Lo-Carbon T-Series models are supplied complete with an integral, instantaneous, automatic louvre shutter concealed behind the interior grille.

It will operate on both intake and extract and at any angle of mounting. The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening
and closing.

When the ventilating unit is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Flat roof
LoWatt T-Series roof models may be installed through solid roofs using a roof plate assembly and, if required, an eggcrate grille or louvred grille in the ceiling below. Alternatively, if ventilation is from a suspended ceiling, single spigots and flexible ducting may be used to connect the unit and extract grille.

Corrugated roof
LoWatt T-Series roof models are suitable for fixing through corrugated sloped and vertical cladding using a suitable soaker flange. The soaker flange consists of a replacement sheet with a flat section to carry the unit. A suitable sealing compound should be used between the plate and the exterior unit seal.

Pitched roof
LoWatt T-Series roof models may be installed in fixing plates with zinc or lead weathering apron (provided by others), fitted directly to a tiled or slated roof to provide a water-tight installation. A suitable sealing compound should be used between the weathering apron and the exterior.

PERFORMANCE:

Unit Size LoWatt TX9RF Wireless LoWatt TX9RF
Stock Ref. No. 45 61 72 45 61 68
Amps @ 240V 0.34 0.34
Extract Performance m³/h Low 313 313
Extract Performance m³/h Med 526 526
Extract Performance m³/h High 693 693
Watts (high) 29 29
dB(A) (med) @ 3m 40 40
---
Unit Size LoWatt TX12RF Wireless LoWatt TX12RF
Stock Ref. No. 45 61 80 45 61 76
Amps @ 240V 0.69 0.69
Extract Performance m³/h Low 518 518
Extract Performance m³/h Med 1017 1017
Extract Performance m³/h High 1194 1194
Watts (high) 67 67
dB(A) (med) @ 3m 48 48
---
Recommended controller:
Wire-less Controller Stock Ref. No. 45 58 74
Wired Stock Ref. No. 45 58 73

DIMENSIONS:

Size A B C D E F Fixing Hole Weight kg
230mm 136 150 304 302 54 400 260 6.22
300mm 171 177 381 378 54 500 337 9.28
Image of Lo-Carbon TX9RF Wireless
Lo-Carbon TX9RF Wireless
Designing ventilation systems with the fan mounted in a skylight or a flat roof is easy. With a low profile cowl, the Lo-Carbon T-Series Roof model is suitable for installation in horizontal, angled and vertical glass and for fixing plates in roofs. For vertical windows or walls in exposed areas and single and double glazing including most types of glass up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Both sizes of Vent-Axia roof plate assemblies can be fitted easily into flat roofs.
Stock Ref. No: 456172A
Price: £626.21 (Exc VAT)
Find a Distributor
Image of Lo-Carbon TX12RF Wireless
Lo-Carbon TX12RF Wireless
Designing ventilation systems with the fan mounted in a skylight or a flat roof is easy. With a low profile cowl, the Lo-Carbon T-Series Roof model is suitable for installation in horizontal, angled and vertical glass and for fixing plates in roofs. For vertical windows or walls in exposed areas and single and double glazing including most types of glass up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Both sizes of Vent-Axia roof plate assemblies can be fitted easily into flat roofs.
Stock Ref. No: 456180
Price: £869.06 (Exc VAT)
Find a Distributor
Image of LoWatt T-Series Wired Controller
LoWatt T-Series Wired Controller
LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
Stock Ref. No: 455873
Price: £104.68 (Exc VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Stock Ref. No: 563552
Price: £200.83 (Exc VAT)
Find a Distributor
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Stock Ref. No: 432949
Price: £109.21 (Exc VAT)
Find a Distributor
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Stock Ref. No: 432953
Price: £219.01 (Exc VAT)
Find a Distributor

Overview

UK's No. 1 Commercial Fan
Designing ventilation systems with the fan mounted in a skylight or a flat roof is easy. With a low profile cowl, the Lo-Carbon T-Series Roof model is suitable for installation in horizontal, angled and vertical glass and for fixing plates in roofs. For vertical windows or walls in exposed areas and single and double glazing including most types of glass up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets.
Both sizes of Vent-Axia roof plate assemblies can be fitted easily into flat roofs.

Shutter
With energy saving in mind, Lo-Carbon T-Series models are supplied complete with an integral, instantaneous, automatic louvre shutter concealed behind the interior grille.

It will operate on both intake and extract and at any angle of mounting. The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening
and closing.

When the ventilating unit is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Flat roof
LoWatt T-Series roof models may be installed through solid roofs using a roof plate assembly and, if required, an eggcrate grille or louvred grille in the ceiling below. Alternatively, if ventilation is from a suspended ceiling, single spigots and flexible ducting may be used to connect the unit and extract grille.

Corrugated roof
LoWatt T-Series roof models are suitable for fixing through corrugated sloped and vertical cladding using a suitable soaker flange. The soaker flange consists of a replacement sheet with a flat section to carry the unit. A suitable sealing compound should be used between the plate and the exterior unit seal.

Pitched roof
LoWatt T-Series roof models may be installed in fixing plates with zinc or lead weathering apron (provided by others), fitted directly to a tiled or slated roof to provide a water-tight installation. A suitable sealing compound should be used between the weathering apron and the exterior.

Technical

PERFORMANCE:

Unit Size LoWatt TX9RF Wireless LoWatt TX9RF
Stock Ref. No. 45 61 72 45 61 68
Amps @ 240V 0.34 0.34
Extract Performance m³/h Low 313 313
Extract Performance m³/h Med 526 526
Extract Performance m³/h High 693 693
Watts (high) 29 29
dB(A) (med) @ 3m 40 40
---
Unit Size LoWatt TX12RF Wireless LoWatt TX12RF
Stock Ref. No. 45 61 80 45 61 76
Amps @ 240V 0.69 0.69
Extract Performance m³/h Low 518 518
Extract Performance m³/h Med 1017 1017
Extract Performance m³/h High 1194 1194
Watts (high) 67 67
dB(A) (med) @ 3m 48 48
---
Recommended controller:
Wire-less Controller Stock Ref. No. 45 58 74
Wired Stock Ref. No. 45 58 73

DIMENSIONS:

Size A B C D E F Fixing Hole Weight kg
230mm 136 150 304 302 54 400 260 6.22
300mm 171 177 381 378 54 500 337 9.28

Models

Image of Lo-Carbon TX9RF Wireless
Lo-Carbon TX9RF Wireless
Designing ventilation systems with the fan mounted in a skylight or a flat roof is easy. With a low profile cowl, the Lo-Carbon T-Series Roof model is suitable for installation in horizontal, angled and vertical glass and for fixing plates in roofs. For vertical windows or walls in exposed areas and single and double glazing including most types of glass up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Both sizes of Vent-Axia roof plate assemblies can be fitted easily into flat roofs.
Stock Ref. No: 456172A
Price: £626.21 (Exc VAT)
Find a Distributor
Image of Lo-Carbon TX12RF Wireless
Lo-Carbon TX12RF Wireless
Designing ventilation systems with the fan mounted in a skylight or a flat roof is easy. With a low profile cowl, the Lo-Carbon T-Series Roof model is suitable for installation in horizontal, angled and vertical glass and for fixing plates in roofs. For vertical windows or walls in exposed areas and single and double glazing including most types of glass up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Both sizes of Vent-Axia roof plate assemblies can be fitted easily into flat roofs.
Stock Ref. No: 456180
Price: £869.06 (Exc VAT)
Find a Distributor

Accessories

Image of LoWatt T-Series Wired Controller
LoWatt T-Series Wired Controller
LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
Stock Ref. No: 455873
Price: £104.68 (Exc VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits: Ambient operating temp range +5°C to +40°C. Changeover relay switch. DEMKO Approved. Dimensions: 87 x 87 x 33mm (H x W x D). Operating range: 30%-90% RH. Pullcord override and neon indicator. Will fit single gang box for surface mounting. Downloads Catalogue Pages
Stock Ref. No: 563552
Price: £200.83 (Exc VAT)
Find a Distributor
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)
Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.
Stock Ref. No: 432949
Price: £109.21 (Exc VAT)
Find a Distributor
Image of Air Quality Sensor (Sentinel)
Air Quality Sensor (Sentinel)
Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.
Stock Ref. No: 432953
Price: £219.01 (Exc VAT)
Find a Distributor

Downloads