Lo-Carbon HR25

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

Reduces the home’s carbon footprint
Designed for installations in bathrooms, toilets and utility areas
84% temperature based heat recovery
Up to 90% energy saving
Controls condensation and eliminates mould
Choice of control options
Long life, low energy DC motor
IP24 rated

Long Life Ventilation
The Vent-Axia Lo-Carbon HR25 range of through the-
wall heat recovery units are suitable for fitting through a 152mm (6”) circular hole and are designed for use in bathrooms, toilets and utility areas. The Lo-Carbon HR25 is available in two lengths, a standard version suitable for wall thicknesses of up to 310mm and an extended version suitable for wall thicknesses of up to 425mm. From a controllability perspective, the HR25 is available either with a standard pullcord switch or with an integral adjustable humidity sensor (‘H’ version), which will work automatically depending on the relative humidity in the room.

Performance
The units are fitted with a 24V DC motor and are supplied with a transformer which has the ability to operate at only 2 Watts power consumption on normal setting.

Maintenance
Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. Filters should be replaced every six months or as conditions necessitate.

DIMENSIONS:

A B C D E F Weight
Standard 508 451 318 147 204 54 3.4
Long 666 548 433 147 204 54 3.4
Image of Lo-Carbon HR25LH
Lo-Carbon HR25LH
An extended version of the HR25H is available, designed for installations where the wall thickness is between 311mm and 425mm.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon HR25H
Lo-Carbon HR25H
The HR25H is fitted with an adjustable humidity sensor which automatically switches between its high and low settings depending on the relative humidity in the room.
Please call 0344 856 0590 for further availability information.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Long Life Ventilation
The Vent-Axia Lo-Carbon HR25 range of through the-
wall heat recovery units are suitable for fitting through a 152mm (6”) circular hole and are designed for use in bathrooms, toilets and utility areas. The Lo-Carbon HR25 is available in two lengths, a standard version suitable for wall thicknesses of up to 310mm and an extended version suitable for wall thicknesses of up to 425mm. From a controllability perspective, the HR25 is available either with a standard pullcord switch or with an integral adjustable humidity sensor (‘H’ version), which will work automatically depending on the relative humidity in the room.

Performance
The units are fitted with a 24V DC motor and are supplied with a transformer which has the ability to operate at only 2 Watts power consumption on normal setting.

Maintenance
Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. Filters should be replaced every six months or as conditions necessitate.

Technical

DIMENSIONS:

A B C D E F Weight
Standard 508 451 318 147 204 54 3.4
Long 666 548 433 147 204 54 3.4

Models

Image of Lo-Carbon HR25LH
Lo-Carbon HR25LH
An extended version of the HR25H is available, designed for installations where the wall thickness is between 311mm and 425mm.
Please call 0344 856 0590 for further availability information.
Image of Lo-Carbon HR25H
Lo-Carbon HR25H
The HR25H is fitted with an adjustable humidity sensor which automatically switches between its high and low settings depending on the relative humidity in the room.
Please call 0344 856 0590 for further availability information.

Downloads