Arterial Duct System

• Reduces installation time
• Can be applied in SAP as a rigid duct system
• Crush resistant semi-rigid duct
• Unique low-resistance manifolds
• Simple installation through joists
• Smooth inner surface with antistatic and antibacterial coating
• Combines the advantages of rigid ducting with the versatility of a semi-rigid system

Select a product

Arterial System
For use with MVHR systems, the Arterial air distribution system provides a
flexible, highly robust solution, which can significantly reduce the installation
time when compared to a standard system.

Rigid vs Semi-Rigid Systems
Both traditional duct types have limitations in modern construction.

Rigid systems: Passing rigid duct through a floor cassette at right-angles to the joists is time consuming and multiple connections increase the risk of leaking ductwork.
Semi-rigid Systems: It can often be difficult to accommodate two distribution boxes and multiple semi-rigid pipe runs in new buildings and the time saving advantages are soon overtaken by the additional cost of materials.

Reduced Installation Time
The Vent-Axia Arterial range combines the advantages of semi-rigid and traditional rigid ducting in one simple system. The system is independently tested and can be applied in SAP as a standard rigid system. Drops between floors to/from the MVHR unit remain in rigid PVC, having the advantage of low space usage and low cost. Traversing through joists in a floor cassette is much simpler and faster when using semi-rigid duct. The secret to the Arterial System is the unique low-resistance distribution plenum (Patent Pending) which is sited between joists allowing connection between semi-rigid and rigid sections.

Image of Single Spigot Adaptor
Single Spigot Adaptor

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Double Connector Plate
Double Connector Plate

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Single Connector Plate
Single Connector Plate

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Blank Plate
Blank Plate

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Reducer
Reducer

Duct Size: 120 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 90mmØ x 50m
Semi-Rigid Ducting 90mmØ x 50m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.

PDF DOWNLOADS:

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations.


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Arterial System
For use with MVHR systems, the Arterial air distribution system provides a
flexible, highly robust solution, which can significantly reduce the installation
time when compared to a standard system.

Rigid vs Semi-Rigid Systems
Both traditional duct types have limitations in modern construction.

Rigid systems: Passing rigid duct through a floor cassette at right-angles to the joists is time consuming and multiple connections increase the risk of leaking ductwork.
Semi-rigid Systems: It can often be difficult to accommodate two distribution boxes and multiple semi-rigid pipe runs in new buildings and the time saving advantages are soon overtaken by the additional cost of materials.

Reduced Installation Time
The Vent-Axia Arterial range combines the advantages of semi-rigid and traditional rigid ducting in one simple system. The system is independently tested and can be applied in SAP as a standard rigid system. Drops between floors to/from the MVHR unit remain in rigid PVC, having the advantage of low space usage and low cost. Traversing through joists in a floor cassette is much simpler and faster when using semi-rigid duct. The secret to the Arterial System is the unique low-resistance distribution plenum (Patent Pending) which is sited between joists allowing connection between semi-rigid and rigid sections.

Technical

Models

Image of Single Spigot Adaptor
Single Spigot Adaptor

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Double Connector Plate
Double Connector Plate

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Single Connector Plate
Single Connector Plate

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Blank Plate
Blank Plate

Duct Size: 220x90 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Reducer
Reducer

Duct Size: 120 to 78Ø

Please call 0344 856 0590 for further availability information.
Image of Semi-Rigid Ducting 90mmØ x 50m
Semi-Rigid Ducting 90mmØ x 50m

Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.

Please call 0344 856 0590 for further availability information.

Downloads

PDF DOWNLOADS:

!!! Catalogue Page