220 x 90mm Central Spigot Attenuator 620mm Length

  • Duct Size: 220 x 90mm
  • Length: 620mm
  • Reduces induct noise
  • Central and offset spigot options to suit each installation
  • Rigid galvanized steel construction
  • Suitable for almost any ventilation system
  • Low pressure loss
Jump to: Overview Downloads
/whole-house-attenuators-central.jpg

Product Overview

Ventilation Type
Ducting
Sector
New Build
Product Range
Duct Attenuators
Ducting/Connection Size
220mm x 90mm

Technical Details
The Wholehouse Attenuator is compatible with either 204x60mm2 or 220x90mm2 ducting. It also offers two spigot options to suit the installation and design requirements. The Wholehouse Attenuator is available with either a standard centralised spigot or, for instances when the ducting is installed flat to a concrete slab, an offset spigot. As well as saving the need for additional ducting components, this allows for a much easier and quicker installation.

Noise Reduction
Offering excellent sound reduction over a range of frequencies, the Wholehouse Attenuator is available in two lengths depending on the noise suppression requirements. For MVHR systems the attenuator can be fitted on the supply side to habitable rooms, reducing airborne in-duct noise. For MVHR and extract-only systems, the attenuator may be placed on the extract side to limit ‘cross-talk’ through ductwork between rooms.

Product Downloads

Catalogue Pages