Filters

Product Type

Sector

Usage

Product Range

Ducting/Connection Size

Product Search Results

77 matching products found (showing 1 - 15)

Super T-Series Heavy Duty Wall Fan 400mm Gravity Shutter

/VA_Super_T-Series.jpeg
  • 4 impeller diameters 355, 400, 450, 500mm
  • Complete with telescopic wall sleeve and shutter, ready for installation
  • IP54 motor and terminal box
  • Smart internal grille and external shutter with flange trim
  • Super quiet operation
  • For the very best performance from your fan, use the Vent-Axia 25 Amp electronic controller

Deluxe Quick Internal Fit Wall Kit White With Backdraught Shutter 100mm

Vent-Axia High Rise Kit White
  • Can be installed entirely from the inside of a property, reducing installation time and removing the need for costly and time consuming external grille fitting involving scaffolding.
  • This innovative new wall kit includes an adjustable wall liner and external grille with a rubber seal on the outside of the building.
  • The wall kit can be adjusted to wall thicknesses anywhere between 225mm and 390mm – just measure the wall, then use the guide on the tube of the wall kit to set it to the correct length.
  • Simply insert the tube into the hole, deploy the external grille and 3 pins will hold the wall kit securely in place. The external grille and seal can then be pulled back against the external wall so a tight fit can be achieved.
  • The external rubber seal covers up any break-out on the external hole and leaves a clean, tidy finish. In addition, the rubber seal will help to protect against water ingress.

Unitex Wall Terminal Large Louvre 250mm Diameter, 80mm Length

/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm

Unitex Wall Terminal Standard Louvre 150mm Diameter, 280mm Length

/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm

Super T-Series Heavy Duty Wall Fan 500mm Electric Shutter

/VA_Super_T-Series.jpeg
  • 4 impeller diameters 355, 400, 450, 500mm
  • Complete with telescopic wall sleeve and shutter, ready for installation
  • IP54 motor and terminal box
  • Smart internal grille and external shutter with flange trim
  • Super quiet operation
  • For the very best performance from your fan, use the Vent-Axia 25 Amp electronic controller

Deluxe Quick Internal Fit Wall Kit Brown 100mm

VA_Duct_High_Rise_Kit_Brown.jpg
  • Can be installed entirely from the inside of a property, reducing installation time and removing the need for costly and time consuming external grille fitting involving scaffolding.
  • This innovative new wall kit includes an adjustable wall liner and external grille with a rubber seal on the outside of the building.
  • The wall kit can be adjusted to wall thicknesses anywhere between 225mm and 390mm – just measure the wall, then use the guide on the tube of the wall kit to set it to the correct length.
  • Simply insert the tube into the hole, deploy the external grille and 3 pins will hold the wall kit securely in place. The external grille and seal can then be pulled back against the external wall so a tight fit can be achieved.
  • The external rubber seal covers up any break-out on the external hole and leaves a clean, tidy finish. In addition, the rubber seal will help to protect against water ingress.

Unitex Wall Terminal Large Louvre 250mm Diameter, 280mm Length

/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm

Unitex Wall Terminal Standard Louvre 125mm Diameter, 80mm Length

/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm