Product Search Results

68 matching products found (showing 1 - 15)
/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm
/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm
/VA_SC_Controller.jpg
  • Infinitely variable speed control
  • Automatic supply voltage detection
  • Adjustable stepless output voltage
  • 230 VAC alarm output
  • Contacts for remote on/off switching
  • Adjustable minimum and maximum speed limits
  • Kick start (default) or soft start
/VA_HR500_Controller.jpg
  • Controller with sensor mode, allows a range of sensors to be used in conjunction with the HR500 units
/VA_eDemand_Controller.jpg
  • Demand ventilation control for A/C speed controllable fans
  • Quick start-up by pre-programmed modes
  • IP54 rated
  • Total motor protection using thermistor connection
  • LCD multifunction display
  • 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
  • CO2 Control
  • Temperature control
  • Constant pressure control
  • Manual remote speed adjuster (0-20mA)
/VA_Pyrocheck_Damper.jpg
  • Suitable for air transfer in doors and partitions
  • Complete seal achieved in approximately five minutes when tested in accordance with BS 476 part 20 & 22
  • UV Stabilised material UPVC
  • Pyrocheck offer much lower resistance to airflow compared to traditional designs
  • Independently tested to BS 476 Part. 22; fire integrity of 68 mins
/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm
/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm
/VA_Unitex_Wall_Terminal.jpeg
  • External weather louvre, wall sleeve and duct connection spigot in one unit
  • Satin anodised louvre gives full weather protection
  • Epoxy powder coated finish, weather louvre available as optional extra
  • 280mm or 80mm wall sleeve section
  • Spigot connections from 100mm to 400mm
/VA_Controllers_SP_SPTK.jpg
  • Separate starter not required when used with HOT SPOT protected fan (SPTK only)
  • Compact and easy to install
  • Suitable for surface or flush mounting (SP5010 surface only)*
  • SP type include ON/OFF switch with neon indicator
  • SPTK type include ON/OFF/RESET switch and indication light fan trip indicator and built in facility for manual reset
  • Complies with required statutory regulations and carries CE mark
/Calido%20Controller.jpg
  • Up to 80% heat recovery to reduce energy bills
  • Reduce the home’s carbon footprint and save money on energy bills
  • Ideal for retrofit applications
  • Intelligent controls to eliminate condensation within the unit
  • Adjustable airflows
  • Filter replacement indicator ensures continuous good indoor air quality
  • Incredibly reliable due to EC motor
  • CE and S Mark - independently tested and certified for safety
  • IP24 rated
  • 5 year warranty
/VA_eDemand_Controller.jpg
  • Demand ventilation control for A/C speed controllable fans
  • Quick start-up by pre-programmed modes
  • IP54 rated
  • Total motor protection using thermistor connection
  • LCD multifunction display
  • 2 x analogue input for sensors (0-10V – separate power supply required, 0-20mA)
  • CO2 Control
  • Temperature control
  • Constant pressure control
  • Manual remote speed adjuster (0-20mA)