Easy Installation The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm. Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.   Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation. Integral Humidity Sensor (BH Models) The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.  
Kinetic B Standard filter
ISO 45% Coarse (G3) (2 pack). Formally known as G3, this filter will provide the minimum required filtration. Replacement filter set comprising 2 filters for the Kinetic B, BH, E, V and Cooker Hood units. Installation instructions included.
cart: Array ( [442356] => Array ( [stock] => 0 [price] => 28.18 [desc] => FILTER G3 SENT. KINETIC B/BH/C 2 PACK [net_weight] => 0.2 [gross_weight] => 0.2 [rPartNum] => 442356 [iPartNum] => 442356 ) )
SKU:
Easy Installation The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm. Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.   Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation. Integral Humidity Sensor (BH Models) The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.  
Kinetic B Standard filter
ISO ePM10 50% (M5) Filter 1 Pack. Formally known as M5, this filter will remove smaller particles, including pollen.  Replacement filter comprising one supply filter for the Kinetic B, BH, E, V and Cooker Hood units. Pack contains one M5 pollen filter. 
cart: Array ( [444199] => Array ( [stock] => 11 [price] => 30.82 [desc] => FILTER M5 SENT KINETIC B/BH/C [net_weight] => 0.3 [gross_weight] => 0.3 [rPartNum] => 444199 [iPartNum] => 444199 ) )
SKU: