Overview
The Vent-Axia Minivent ducted bath/shower kit includes all the components necessary to install a ducted 100mm system in one box. This simplifies fitting of an efficient ventilation system to small rooms, including bath and shower rooms and WC's. It is especially suitable for en-suite bathrooms.
The fan kit has ample performance to meet the Building Regulations Requirements for WC's. The timer version should be used for internal rooms.
The kit consists of a Minivent IP44 In-Line fan, a white ceiling grille and spigot, 3 metres* of flexible duct and an external louvre for soffit or wall mounting. The duct should be cut to the required length and the bend radius kept to a maximum to provide the best fan performance.
Enclosed terminal compartment, Class 1 earthed appliance.
Supply voltage 220-240/1/50Hz.
Built-in Controls
Timer Model
15 minute overrun timer complies with Building Regulations Document F. The timer is triggered by the lighting circuit. Pre-wired for easy installation.
Model Range
|
|
| Lo-Carbon MiniVent B |
Comprises - high output tube fan, 3 metres of flexible duct, ceiling inlet grille and spigot, soffit/wall outlet grille.
|
|
|
|
|
|
| Lo-Carbon MiniVent T |
Comprises - high output tube fan, 3 metres of flexible duct, ceiling inlet grille and spigot, soffit/wall outlet grille.
|
|
|
|
[^Top of page]Accessories
|
|
| Air Replacement Grille Set (Ivory) |
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic.
Dimensions: 454 x 90mm.
|
|
|
|
|
|
| Air Replacement Grille Set (Brown) |
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic.
Dimensions: 454 x 90mm.
|
|
|
|
|
|
| Ambient Response Humidity Sensor |
The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls.
Features & Benefits:
- Ambient operating temp range +5°C to +40°C.
- Changeover relay switch.
|
|
|
|
|
|
| Ecotronic Humidity Sensor |
An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed.
Features & Benefits:
- Ambient operating temp range 0°C to +40°C.
- BEAB Approved.
- Dimensions: 87 x 87 x 33mm (H x W x D).
- Maximum switching load 1 amp inductive.
- Pullcord override indicated by lamp.
- Setting Range: 65% - 90%RH.
|
|
|
|
[^Top of page]Product Specification
| Model | Stock Ref. No. | m³/h | l/s | Watts | dB(A) @ 3m |
|---|
| VA Minivent SK | 24 87 10A | 110 | 30 | 20 | 37 |
| VA Minivent SKT | 24 88 10A | 110 | 30 | 22 | 37 |
Performance
Performance
[^Top of page]Dimensions
| A | ØB | C (Timer) |
|---|
| mm | 80 | 98 | 115 |
[^Top of page]Typical Specifications
Supply and install a Minivent in-line ducted fan kit including white ceiling grille and spigot, 3 meters of flexible ducting and an external louvre as manufactured by Vent-Axia Ltd, Fleming Way, Crawley, West Sussex, RH10 9YX, Telephone: 01293 526062.
When installed the fan performance should meet the Building Regulation (Document F) requirements.
The motor should be manufactured with self aligning sleeve bearings and be fitted with Standard Thermal Overload Protection (S.T.O.P.) the motor should be insulated to Class B.
| Operation: | |
|---|
| Minivent SK | via light switch |
| Minivent SKT | via light switch timer overrun facility |
