Overview
Behind the grille of the T-Series wall model is a range of high performance extract/intake ventilating units designed to fit through most wall thicknesses using telescopic liners supplied. For walls of exceptional thickness additional liners can be used. T-Series also features a unique speed control pack which enables high, medium or low speed to be preset to suit room size or required duty. Conduit entry is provided for concealed wiring.
T-Series controllers may be used with this model to obtain a choice of speeds, reversible airflow direction and automatic sensor operation. When used with a T-Series TSC controller, the speed control pack is removed from the T-Series ventilating unit and fitted into the 3-pin socket in the back of the controller. The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting and 'E' mode. When using the Ecotronic controller the speed control pack remains in the fan.
Model Range
|
|
| TX6WL |
Behind the grille of the T-Series wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
|
|
|
|
|
|
| TX7WL |
Behind the grille of the T-Series wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
|
|
|
|
|
|
| TX9WL |
Behind the grille of the T-Series wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
|
|
|
|
|
|
| TX12WL |
Behind the grille of the T-Series wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
|
|
|
|
[^Top of page]Accessories
|
|
| T-Series Controller |
- Three speeds. Choice of extract/intake
- Shutter open, fan Off setting
- Sensor mode. Enables external electro mechanical switches, eg:
Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.
|
|
|
|
|
|
| Ecotronic Controller |
For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.
|
|
|
|
|
|
| Ambient Response Humidity Sensor |
The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls.
Features & Benefits:
- Ambient operating temp range +5°C to +40°C.
- Changeover relay switch.
|
|
|
|
|
|
| Air Quality Sensor |
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms.
|
|
|
|
|
|
| Ecotronic Humidity Sensor |
An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed.
Features & Benefits:
- Ambient operating temp range 0°C to +40°C.
- BEAB Approved.
- Dimensions: 87 x 87 x 33mm (H x W x D).
- Maximum switching load 1 amp inductive.
- Pullcord override indicated by lamp.
- Setting Range: 65% - 90%RH.
|
|
|
|
[^Top of page]Product Specification
Shutter
TX models are supplied complete with an integral instantaneous automatic louvre shutter which will operate on both intake and extract and at any angle of mounting.
The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum backdraught protection. When the ventilating unit is used with a T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.
Electrical
Motor purpose-designed. Suitable for running at any angle. Quiet running, enclosed. Suitable for operation in ambient temperatures from -40°C to +50°C.
Fitted with self resetting Standard Thermal Overload Protection (S.T.O.P.).
Supply voltage 220-240V/1/50Hz (120V 1/60 Hz).
[^Top of page]Performance
Output is for the extract airflow on HIGH.
[^Top of page]Dimensions
| Size | 6 (150mm) | 7 (190mm) | 9 (230mm) | 12 (300mm) |
|---|
| A | 310 | 352 | 391 | 470 |
| B | 303 | 345 | 388 | 467 |
| C | 290 | 330 | 365 | 442 |
| D | 290 | 330 | 375 | 450 |
| E | 104 | 124 | 143 | 182 |
| Weight (kg) | 5.54 | 6.13 | 7.77 | 10.86 | |
[^Top of page]
