Overview
This ever popular range of extract/intake ventilating units continues to satisfy the most demanding requirements of efficient ventilation. The Standard range unit is supplied without a shutter. The shutter is available as an accessory which can be easily fitted within the unit.
Standard range fans are suitable for most forms of single glazing or can be wall mounted in a Vent-Axia fixing plate. Vent-Axia's patented spigot and ring method of fixing ensures easy installation and weather proof joint. The simple integrated component design makes installation and servicing easy.
Easy Cleaning
Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools
Protective Grilles
Where Standard range units are installed in low positions, finger guards provide extra protection to VDE, DIN 31001.
Model Range
|
|
| Standard Range Window Model S6WW |
Classic Retro-Style Ventilation
This ever popular range of extract/intake ventilating units continues to satisfy the most demanding requirements for efficient
ventilation. The Vent-Axia Standard Range unit is supplied without a shutter. The shutter is available as an accessory, which
can be easily fitted within the unit.
|
|
|
|
|
|
| Standard Range Window Model S7WW |
Classic Retro-Style Ventilation
This ever popular range of extract/intake ventilating units continues to satisfy the most demanding requirements for efficient
ventilation. The Vent-Axia Standard Range unit is supplied without a shutter. The shutter is available as an accessory, which
can be easily fitted within the unit.
|
|
|
|
|
|
| Standard Range Window Model S9WW |
Classic Retro-Style Ventilation
This ever popular range of extract/intake ventilating units continues to satisfy the most demanding requirements for efficient
ventilation. The Vent-Axia Standard Range unit is supplied without a shutter. The shutter is available as an accessory, which
can be easily fitted within the unit.
|
|
|
|
|
|
| Standard Range Window Model S12WW |
Classic Retro-Style Ventilation
This ever popular range of extract/intake ventilating units continues to satisfy the most demanding requirements for efficient
ventilation. The Vent-Axia Standard Range unit is supplied without a shutter. The shutter is available as an accessory, which
can be easily fitted within the unit.
|
|
|
|
[^Top of page]Accessories
|
|
| Ecotronic Controller |
For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.
|
|
|
|
|
|
| Ambient Response Humidity Sensor |
The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls.
Features & Benefits:
- Ambient operating temp range +5°C to +40°C.
- Changeover relay switch.
|
|
|
|
|
|
| Air Quality Sensor |
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms.
|
|
|
|
|
|
| Ecotronic Humidity Sensor |
An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed.
Features & Benefits:
- Ambient operating temp range 0°C to +40°C.
- BEAB Approved.
- Dimensions: 87 x 87 x 33mm (H x W x D).
- Maximum switching load 1 amp inductive.
- Pullcord override indicated by lamp.
- Setting Range: 65% - 90%RH.
|
|
|
|
[^Top of page]Product Specification
Motor
Purpose designed enclosed motor. Suitable for running at any angle. Quiet running, enclosed.
Supply voltage 220-240V/1/50 Hz.
Suitable for operation in ambient temperatures from -40° to +50°C. Fitted with Standard Thermal Overload Protection (S.T.O.P.).
Shutter
Type SD/R. This extract/intake shutter fits inside the Vent-Axia unit and closes against unwanted backdraughts. It can be fitted at the same time as the unit or at a later date if required.
Airflow operated for extract use, cord operated lock for intake use. For all models mounted in vertical surfaces.
| Unit size | 6 | 7 | 9 | 12 |
|---|
| Type | S6/WW | S7/WW | S9/WW | S12/WW |
| Stock Ref. No. | 13 13 10 | 13 23 10 | 13 33 10 | 13 43 10 |
| Amps @ 240V | 0.16 | 0.16 | 0.24 | 0.36 |
| Extract Perf MAX m³/h | 285 | 425 | 710 | 1560 |
| Watts MAX. | 32 | 34 | 53 | 84 |
| dB(A) (med) @ 3m | 35 | 31 | 39 | 42 |
| Shutter Type SD/R | 23 17 10 | 23 27 10 | 23 37 10 | 23 47 10 |
| Range-master |
| RVS Surface | W30 01 10 | W30 01 10 | W30 01 10 | W30 01 10 |
| Flush Fitting | W30 01 10 | W30 01 10 | W30 01 10 | W30 01 10 |
| + 40 01 44 | + 40 01 44 | + 40 01 44 | + 40 01 44 |
| Time Switch Type TTC | W36 13 10 | W36 13 10 | W36 13 10 | W36 13 10 |
| Multi-unit Type MUC | W36 23 10 | W36 23 10 | W36 23 10 | W36 23 10 |
Dimensions
| Impeller dia. | 150mm | 190mm | 230mm | 300mm |
|---|
| A | 140 | 147 | 166 | 201 |
| BØ | 216 | 254 | 295 | 381 |
| C | 21 | 21 | 21 | 21 |
| D | 83 | 83 | 92 | 105 |
| E (max) | 10 | 10 | 10 | 13 |
| Fixing hole dia. | 184 | 222 | 260 | 337 |
| Weight | 2.9kg | 3.2kg | 4.6kg | 7.0kg |
[^Top of page]Typical Specifications
Supply and install a Standard Range Window fan as manufactured by Vent-Axia Ltd, Fleming Way, Crawley, West Sussex, RH10 9YX Telephone: 01293 526062.
The fan should be suitable for all forms of single glazing, including wire cast, reeded, leaded lights and fixing plates up to 10mm thick.
The fan should have the option of a backdraught shutter.
The fan should be fully reversible and be able to be controlled by using variable speed controllers or by humidity, air quality or TimeSwitches.
The unit should meet with Document F of the Building Regulations.
The motor should be suitable for mounting at any angle and suitable for operation in ambient temperatures from -40°C to +50°C and should be fitted with self resetting Standard Thermal Overload Protection (S.T.O.P.).
[^Top of page]
