shadow

Silhouette 150 - Mains Kitchen & Utility Room Fans


 ip44 kitchen

Overview

The Silhouette range is designed for modern living. With a profile of only 19mm on the kitchen models, Silhouette blends in with the wall surface to provide an unobtrusive installation. Careful design means a ‘white sound’ spectrum understates the dB(A) sound levels providing optimised sound to performance output.

Mounted in the centre of the fan, beneath the ultra slim profile grille, are the electronics, incorporating a choice of integral control, a humidistat for detecting a change in internal humidity or an overrun timer option that is adjustable between 5 and 30 mins. Silhouette can be ceiling/panel mounted and connected to an appropriate duct run to the outside.

Model Range

Silhouette 150X
Single speed 150mm kitchen fan with neon running light and electric backdraught shutter
Stock Ref No: 454059A
Silhouette 150XT
Single speed 150mm kitchen fan with integral adjustable electronic overrun timer (up to 30 mins), neon running light and electric backdraught shutter.
Stock Ref No: 454060A
Silhouette 150XH
Single speed 150mm with integral adjustable auto humidity sensor from 60-90% RH, neon running light and electric backdraught shutter.
Stock Ref No: 454061A
[^Top of page]

Accessories

[^Top of page]

Product Specification


Type Stock Ref. No. Timer 30 mins Humidstat 60-90%RH m³/h Performance l/s Watts dB(A) @ 3m
For utility rooms and kitchens
Silhouette 150X 45 40 59 280 78 35 47
Silhouette 150XT 45 40 60 Yes 280 78 35 47
Silhouette 150XH 45 40 61 Yes Yes 280 78 35 47

[^Top of page]

Performance

Silhouette 150



[^Top of page]

Dimensions


Silhouette A C D E F G H
150mm 200 152 Ø148 51 104 129 220 37
Weight 150mm 1.75kg

Silhouette 150

150mm Wall Model
Fixing hole diameter 160mmØ <br />(when wall kit is used)
Fixing hole diameter 160mmØ
(when wall kit is used)

[^Top of page]

Typical Specifications

Supply and install a Silhouette axial fan for installations in walls or ceilings, with electric backdraught shutter on the 150mm version as supplied by

Vent-Axia Ltd
Fleming Way
Crawley
West Sussex
RH10 9YX
Telephone: 01293 526062.

The fan performance should meet the Building Regulations (Document F) Requirements 60 l/s for kitchens (30 minute timer overrun model for internal WC’s). The profile should be no more than19mm thick.

The motor should be a ball bearing motor for installation at any angle and fitted with Standard Thermal Overload Protection (S.T.O.P.).

[^Top of page]