LuminAir - Fan & Light
Overview
The revolutionary Vent-Axia LuminAir Safety Extra Low Voltage fan and light in a single ceiling mounted fitting.
The IPX7 unit is installed directly over a shower in complete safety. Vent-Axia LuminAir extracts moisture and humidity at source, preventing damaging condensation from spreading. At the same time it bathes the shower enclosure in a rich soft light - bringing any dark shower to life. Ideal for all types of bathroom and shower applications, and is particularly suitable for bedsit and en-suite shower installations.
Designed for mounting in a wide variety of ceiling thicknesses. The safety isolating transformer to BS EN 60742 is mounted in a purpose made enclosure that can be wall mounted or sited in the loft, and is designed to accept mini trunking (LuminAir L transformer - IP20 - loft mounted).
LuminAir has a 20 Watt 40° spread, pre-formed Dichroic Multi-Mirror™ lamp, to give a pool of soft warm light. The lamp has a long life and is simple to change.
Sectional view of LuminAir
European Patented No. EP0730716
Australian Patent No. 677461
South African Patent No. 94/8865
LuminAir Vent Light
Illuminated air inlet for powered ducted systems.
For upgrading existing extract systems or to provide multiple extract points to a central fan. The Vent Light consists of a LuminAir Safety Extra Low Voltage (SELV) light with white ceiling bezel and 90° bend. The bend is especially suitable for connection to extract ductwork runs between joists. On/Off operation is via the bathroom light switch. Gold and silver bezels are available as accessories.
Supply to the LuminAir transformer 220-240V/1/50Hz.
Output to LuminAir 12V SELV/1/50Hz. Safety isolating transformers conform to BS EN 60742.
Stylish Chrome or Gold Bezels are also available.
Model Range
 |
|
 |
|
 |
|
Accessories
 |
|
 |
|
 |
|
 |
|
 |
|
Product Specification
| Type | LuminAir Stock Ref. No. White | Amps @ 240V | Free Air Extract performance m³/h | l/s |
|---|---|---|---|---|
| LuminAir L | 18 81 10 | 0.2 | 110 | 31 |
| LuminAir T | 18 82 10 | 0.2 | 110 | 31 |
| LuminAir H | 18 86 10 | 0.2 | 110 | 31 |
| Type | LuminAir Stock Ref. No. White | Max Watts | dB(A) @ 3m | Bezel Accessory Colour Stock Ref. No. Chrome | Stock Ref. No. Gold |
|---|---|---|---|---|---|
| LuminAir L | 18 81 10 | 40 | 35 | 45 20 44 | 45 20 45 |
| LuminAir T | 18 82 10 | 42 | 35 | 45 20 44 | 45 20 45 |
| LuminAir H | 18 86 10 | 44 | 35 | 45 20 44 | 45 20 45 |
Performance
Performance
Dimensions
Manufacturers of some fluorescent/low energy lighting systems indicate that these can interfere with other electronic/timing circuits. For reliable operation of these circuits we recommend therefore that a tungsten filament light is used.
| A | B | C | D | E | F | G | |
|---|---|---|---|---|---|---|---|
| LuminAir | 150 | 140 | 98 | 103 | 150 | 101 | 180 |
| Transformer (T&H) | 175 | 90 | 55 | 30 | |||
| Transformer (L) | 83 | 76 | 70 | 61 | |||
| Humidity Sensor | 87 | 33 |
Fixing hole diameter 110mm
Fan & Light Vent Light
Transformer/Control(T&H)
LuminAir Transformer (L)
Humidity Sensor (H)
Typical Specifications
Supply and install a Luminair Safety Extra Low Voltage (SELV) in line fan and light combination as manufactured by Vent-Axia Ltd, Fleming Way, Crawley, West Sussex, RH10 9YX, Telephone 01293 526062. When installed the fan complies with the 16th edition of IEE Regulations (BS7671), 2001) and an on site guide for Safety Extra Low Voltage (SELV) operation. The transformer should be safety insulating to BS EN 60742. The fan should be rated to IPX7. The fan and transformer should be BEAB approved.
The fan performance should meet the Building Regulation (Document F) requirements.
The motor should be manufactured with self aligning sleeve bearings and fitted with Standard Thermal Overload Protection, (S.T.O.P.) the motor should be insulated to Class B and designed to operate on SELV 12V/1/50Hz.
| Operation: | |
|---|---|
| Luminair L | via light switch |
| Luminair T | via light switch timer overrun facility |
| Luminair H | with adjustable humidity sensor |
