
Lo-Carbon - VA150Prices and stock levels correct at the time of printing (07/09/10 11:43)
![]() OverviewVent-Axia LoCarbon fans feature LoCarbon long life DC energy saving motors that last 5 times longer than conventional motors, whilst delivering up to 80% energy savings. The extended life of Lo Carbon fans is due to the use of a new generation of high quality electronically controlled ball-bearing motors especially developed for this range. The motors are perfectly designed for the wet conditions of utility rooms and kitchens, extracting stale, moisture-laden air quietly and efficiently. Shutters Installation 150mm telescopic wall kits are available with a white or brown outside grille. The kit is supplied with a telescopic wall sleeve to fit walls 225–360mm thick. Window fitting kits are available for use with all Lo Carbon 150mm models through single or double glazed windows up to 40mm thick. The range meets the requirements of the current Building Regulations Document F for the ventilation of utility rooms 30l/s and for kitchens 60l/s. ![]() Model Range
Product SpecificationFor even more energy efficiency the Vent-Axia Lo Carbon range is available with Integral Timer or integral Humidity Sensor. Remote PIR sensors are available which operate the fan only when required.
Easy wire terminals, for simple installation, offers the choice of either kitchen or utility room performance. NOTE: The Transformer is an integral part of the fan which MUST NOT be installed as a SELV product. PerformanceOutput is for all the extract airflow, dependant on setting. WALL KIT - WINDOW KIT -
Dimensions
Lo Carbon Kitchen/Utility
Typical SpecificationsLoWatt U/KP, U/KT, U/KH Vent-Axia Ltd The fan case and grille shall be made from ABS plastic and have an axial impeller. The fan should be double insulated to meet IEE regulations and meet the Building Regulation (Document F) requirements of 30 litres a second for utilities and 60 litres a second for kitchens. The electronically controlled motor is fitted with long life ball bearings to provide an expected 50,000 hour running life and a Standard Thermal Overload Protection (S.T.O.P.). The motor should be insulated to Class III (-25°C to +40°C) and is to conform to BS EN 60335-2-80. Operation via pullcord, external switch with overrun timer or humidity control/pullcord. The fan is to be wall mounted using a wall kit 14 09 02A (white) or 14 09 03A (Brown), or window mounted using a window kit 14 09 01A (white).
|