Overview
Slimline Lo-Carbon Kitchen & Utility Room Ventilation
The Lo-Carbon Silhouette range is designed for modern living. With a profile of only 19mm on the kitchen models, Lo-Carbon Silhouette blends in with the wall surface to provide an unobtrusive installation.
Mounted in the centre of the fan, beneath the ultra slim profile grille, are the electronics, incorporating a humidistat for detecting a change in internal humidity or an overrun timer option that is adjustable between 5 and 30 mins.
Model Range
|
|
| NEW Lo-Carbon Silhouette 150T |
150mm bathroom/toilet fan with integral adjustable electronic overrun timer (up to 30 mins), neon running light which
operates a manual override only and backdraught shutter.
|
|
|
|
|
|
| Lo Carbon Silhouette 150HT |
150mm with integral adjustable auto humidity sensor from 60-90% RH and overrun timer, neon running light which operates on the manual override only and backdraught shutter.
|
|
|
|
[^Top of page]Accessories
|
|
| 150mm Wall Kit (White) |
A range of 100mm and 150mm wall kits for use when installing into walls using the telescopic liners supplied.
|
|
|
|
|
|
| 150mm Wall Kit (Brown) |
A range of 100mm and 150mm wall kits for use when installing into walls using the telescopic liners supplied.
|
|
|
|
[^Top of page]Product Specification
| Type | m³h | l/s | Watts | dB(A) @ 3m |
|---|
| Utility setting |
| Lo-Carbon Silhouette 150B | 165 | 46 | 3.5 | 35 |
| Lo-Carbon Silhouette 150T | 165 | 46 | 3.5 | 35 |
| Lo-Carbon Silhouette 150H | 165 | 46 | 3.5 | 35 |
| Kitchen setting |
| Lo-Carbon Silhouette 150B | 241 | 67 | 7.5 | 43 |
| Lo-Carbon Silhouette 150T | 241 | 67 | 7.5 | 43 |
| Lo-Carbon Silhouette 150H | 241 | 67 | 7.5 | 43 |
Dimensions
| Silhouette | A | BØ | C | D | G | H |
|---|
| 150mm | 223 | 147 | 130 | 19 | 220 | 37 |
| Weight 150mm 1.75kg | | | | | | |
Lo Carbon Silhouette 150
150mm Wall model
Fixing hole diameter 152mmØ (when wall kit is used)
[^Top of page]Typical Specifications
Supply and install a Silhouette axial fan for installations in walls, panels or ceilings, with backdraught shutters and guide vanes as supplied by:
Vent-Axia Ltd
Fleming Way
Crawley
West Sussex
RH10 9YX
Telephone: 01293 526062.
The fan performance should meet the Building Regulations (Document F) Requirements of 15 l/s for bathrooms or toilets (30 minute timer overrun model for internal WC’s). The profile should be no more than 12mm thick.
The motor should be a ball bearing motor for installation at any angle and fitted with Standard Thermal Overload Protection (S.T.O.P.)
[^Top of page]
