Overview
With a slim profile of only 17mm, Silhouette blends in with the wall surface to provide an unobtrusive installation.
Silhouette has a FID performance of 95m3/h. Silhouette can be ceiling/panel mounted and connected to an appropriate
duct run to the outside. Safety Extra Low Voltage (SELV) Designed for areas where a fan has to be fittedwithin zone 1 in a room containing a fixed bath or shower according to IEE wiring regulations. The New Silhouette SELV can be safely installed within the spray area. The fan is rated IPX7 control is by a mains safety isolating transformer with 12V DC
SELV output, which is sited away from any source of spray and out of reach of a
person using fixed bath or shower.
Model Range
|
|
| Lo-Carbon Silhouette 100SVT |
100mm bathroom/toilet fan with adjustable electronic overrun timer (up to 30 mins), in the transformer neon running light which operates whenever the fan is on and backdraught shutter.
|
|
|
|
|
|
| Lo-Carbon Silhouette 100SVH |
100mm bathroom/toilet fan with remote adjustable auto humidity sensor from 60- 90% RH, neon running light which
operates whenever the fan is on and backdraught shutter.
|
|
|
|
[^Top of page]Accessories
|
|
| Air Replacement Grille Set (Ivory) |
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic.
Dimensions: 454 x 90mm.
|
|
|
|
|
|
| Air Replacement Grille Set (Brown) |
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic.
Dimensions: 454 x 90mm.
|
|
|
|
[^Top of page]Product Specification
| Type | m³h | l/s | Watts | dB(A) @ 3m |
|---|
| BATHROOM |
| Lo-Carbon Silhouette 100SVB | 95 | 26 | 7.5 | 32 |
| Lo-Carbon Silhouette 100SVT | 95 | 26 | 7.5 | 32 |
| Lo-Carbon Silhouette 100SVH | 95 | 26 | 7.5 | 32 |
| TOILET |
| Lo-Carbon Silhouette 100SVB | 55 | 15 | 3.5 | 26 |
| Lo-Carbon Silhouette 100SVT | 55 | 15 | 3.5 | 26 |
| Lo-Carbon Silhouette 100SVH | 55 | 15 | 3.5 | 26 |
Dimensions
| Silhouette | A | BØ | C | D | E | F |
|---|
| 100mm | 160 | 99 | 105 | 122 | 200 | 32 |
| Weight 100mm 0.06kg | | | | | | |
Lo Carbon Silhouette 100SELV
100mm Wall model
Fixing hole diameter 117mmØ
[^Top of page]Typical Specifications
Supply and install a Silhouette axial fan for installations in walls, panels or ceilings, with backdraught shutters and guide vanes as supplied by:
Vent-Axia Ltd
Fleming Way
Crawley
West Sussex
RH10 9YX
Telephone: 01293 526062.
The fan performance should meet the Building Regulations (Document F) Requirements of 15 l/s for bathrooms or toilets (30 minute timer overrun model for internal WC’s). The profile should be no more than 12mm thick.
The motor should be a ball bearing motor for installation at any angle and fitted with Standard Thermal Overload Protection (S.T.O.P.). The fan should be DEMKO Approved.
[^Top of page]
