shadow
Vent-Axia

HR400

Print Page
Prices and stock levels correct at the time of printing (05/02/12 2:21)

Overview

The HR400 is a wholehouse ventilation system comprising a fan assisted heat recovery unit.The HR400 is usually installed as a single unit, but multiple systems can be used for zoning or increased capacity. The unit offers an optional pollen filter for the fresh air supply, this option benefits asthma and hay fever sufferers.

Selectable performance levels: Up to 310m³/h, based on typical ducted systems. The HR400 can be used installed in many types of building - houses, flats, bungalow’s, offices and nursing homes,etc.

Installation

All components for wholehouse systems are fully compatible, resulting in a wide range of options for the system specification. All units are supplied with a comprehensive installation guide, providing step by step instructions for successful installation. In addition, a full backup service is available if required, with experienced engineers available to answer any queries you may have concerning your installation.

Model Range

HR400
The HR400 is a wholehouse ventilation system comprising a fan assisted heat recovery unit.The HR400 is usually installed as a single unit, but multiple systems can be used for zoning or increased capacity. The unit offers an optional pollen filter for the fresh air supply, this option benefits asthma and hay fever sufferers. Selectable performance levels: Up to 310m³/h, based on typical ducted systems. The HR400 can be used installed in many types of building - houses, flats, bungalow’s, offices and nursing homes,etc.
Stock Ref No: 370552
VCON77 Transformer
Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch.
Stock Ref No: 370357
[^Top of page]

Performance

HR400 to be used with a VCON77 Transformer for maximum controllabilty


Motor Speed 1 2 3 4 5 6
Volume m³/h (FID) 140 180 220 245 270 310



[^Top of page]

Dimensions

Weight: 19kg


Power Consumption
Speed 1 80V N/A
Speed 2 100V 71W
Speed 3 120V 87W
Speed 4 140V 101W
Speed 5 160V 115W
Speed 6 240V 179W



[^Top of page]

Typical Specifications

Supply and install a HR400 Wholehouse heat recovery unit as manufactured by:

Vent-Axia Clean Air Systems
Fleming Way
Crawley
West Sussex
RH10 9YX

Performance: m³/h l/s
Max ventilation rate 310.0 86.11
N° speed settings 6

Efficiency: The unit should retain up to 70% of the temperature differential of out going air.

Heat exchanger: should be of a multi plate cross-flow type constructed out of a polymeric plastic with ultra sonic welded joints.

Motor: should be a 240V 50Hz A/C with sleeve bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a manual reset thermal overload protective device.

Fan: The fan impeller should be of a forward curved centrifugal type, dynamically balanced.

Controls: The unit should be powered via a remote multi-step transformer that provides a switch gate between a selected slow speed and boost condition. The switch can be a manual or sensor type or a combination of both.

Ducting spigots: The unit should provide 100mm Ø x 100mm tapered spigots for all duct connections with the exception of the fresh air inlet that should have an stepped 100mm ø x150mm spigot. The unit cannot be handed. (Can be converted to flat ducting).

Filter: Not fitted as standard.
Pollen filters are available. Synthetic material tested to EU3 with 85% arrestance. (Eurovent 4/5 test BS6540).
Stock Ref No: 37 04 97

Condensation: The outlet provided should be 22mm Ø located on the left hand side of the unit.

Construction: The unit outer case and fan volutes should be moulded from black MDPE.

Mounting: Horizontal or Vertical

Sound Levels: dB(A) @ 3m
Minimum 26.0
Maximum 56.0

Mains electrical supply: 230VAC 50Hz.

Complies to the following approvals/directives: CE.

[^Top of page]

Vent-Axia are leading manufacturers and suppliers of heating, ventilation and air conditioning systems, both in the UK and around the world. For over 75 years, we have led the industry in air ventilation products, systems and services. Whatever your requirement, budget or setting, Vent-Axia can provide the solution you need. From extraction fans for the home to large commercial ventilation solutions, our wide HVAC range features a product for every air handling purpose.

Vent-Axia's popular Lo Carbon range combines all the style and durability you expect from a Vent-Axia product with even greater energy efficiency, helping you to make your property as eco friendly as possible. Together with the Lo Carbon range, our renewables range of heat pumps, demand energy recovery ventilation and heat recovery (HRV) and mechanical extract systems are also available to aid new sustainable building projects to adhere to the Code for Sustainable Homes.

In combination with our exceptional ventilation product range we also offer a comprehensive range of heating products ideal to heat your home, our range of electric heating includes, storage heaters and combination storage heaters,  panel heaters, towel rails, portable heating, fan heaters, convector heaters and radiant heating.  Our latest product introduction brings electric underfloor heating to the portfolio, this range consists of electric underfloor heating mats, underfloor heating thermostats, underfloor heating kits and underfloor heating insulation boards to offer a comprehensive solution.

In addition to our ever-growing domestic and commercial ventilation ranges, Vent-Axia also supply air curtains, hand dryer products and fume handling/smoke fans. We can also support your air conditioning requirements.

Vent-Axia products are available from distributors around the UK and Eire and also around the world via our network of international distributors. Many of our ranges can also be ordered via our online store. Browse our full range of heating, ventilation and air conditioning products by clicking here. You can also contact us for any further enquiries.