


Overview
The Lo-Carbon Silhouette range is designed for modern living. With a slim profile of only 17mm, Lo-Carbon Silhouette blends in with the wall surface to provide an unobtrusive installation. Lo-Carbon Silhouette has a FID performance of 95m3/h, and is double insulated, with a power consumption only 13 watts. Careful design means a ‘white sound’ spectrum understates the dB(A) sound levels providing optimised sound to performance output.
Model Range
|
|
| Silhouette 100B |
100mm, bathroom/toilet fan with neon running light and backdraught shutter
|
|
|
|
|
|
| Lo-Carbon Silhouette 100T |
100mm bathroom/toilet fan with integral adjustable electronic overrun timer (up to 30 mins), neon running light which
operates a manual override only and backdraught shutter.
|
|
|
|
|
|
| Lo Carbon Silhouette 100H |
100mm bathroom/toilet fan with integral adjustable auto humidity sensor from 60- 90% RH, neon running light which operates a manual override only and backdraught shutter.
|
|
|
|
[^Top of page]Accessories
|
|
| Air Replacement Grille Set (Ivory) |
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic.
Dimensions: 454 x 90mm.
|
|
|
|
|
|
| Air Replacement Grille Set (Brown) |
Suitable for fitting to doors and panels to allow better internal air circulation and replacement. Consists of a two-piece telescopic set, which fits unobtrusively on either side of the door panel. Minimum fixing thickness 30mm. Plastic.
Dimensions: 454 x 90mm.
|
|
|
|
[^Top of page]Product Specification
| Type | m³h | l/s | Watts | dB(A) @ 3m |
| BATHROOM |
| Lo-Carbon Silhouette 100B | 95 | 26 | 6 | 32 |
| Lo-Carbon Silhouette 100T | 95 | 26 | 6 | 32 |
| Lo-Carbon Silhouette 100H | 95 | 26 | 6 | 32 |
| TOILET |
| Lo-Carbon Silhouette 100B | 55 | 15 | 2 | 26 |
| Lo-Carbon Silhouette 100T | 55 | 15 | 2 | 26 |
| Lo-Carbon Silhouette 100H | 55 | 15 | 2 | 26 |
[^Top of page]Performance
Silhouette 100

[^Top of page]Dimensions
| Silhouette | A | BØ | C | D | E | F |
| 100mm | 160 | 99 | 105 | 122 | 200 | 32 |
| Weight 100mm 0.06kg | | | | | | |
Lo Carbon Silhouette 100

100mm Wall model

Fixing hole diameter 115mmØ (when wall kit is used)
[^Top of page]Typical Specifications
Supply and install a Silhouette axial fan for installations in walls, panels or ceilings, with backdraught shutters and guide vanes as supplied by:
Vent-Axia Ltd
Fleming Way
Crawley
West Sussex
RH10 9YX
Telephone: 01293 526062.
The fan performance should meet the Building Regulations (Document F) Requirements of 15 l/s for bathrooms or toilets (30 minute timer overrun model for internal WC’s). The profile should be no more than 12mm thick.
The motor should be a ball bearing motor for installation at any angle and fitted with Standard Thermal Overload Protection (S.T.O.P.). The fan should be DEMKO Approved.
[^Top of page]