The Silhouette range is designed for modern living. With a profile of only 19mm on the kitchen models, Silhouette blends in with the wall surface to provide an unobtrusive installation. Careful design means a ‘white sound’ spectrum understates the dB(A) sound levels providing optimised sound to performance output.
Mounted in the centre of the fan, beneath the ultra slim profile grille, are the electronics, incorporating a choice of integral control, a humidistat for detecting a change in internal humidity or an overrun timer option that is adjustable between 5 and 30 mins. Silhouette can be ceiling/panel mounted and connected to an appropriate duct run to the outside.
| 
| | 19mm actual profile
| Electrical backdraught shutter
|
Silhouette 150mm models
Slim profile only 19mm. FID performance of 280m3/h, double insulated. Power
consumption only 35 watts.
Silhouette 150X -
Single speed 150mm kitchen fan with neon running light and electric
backdraught shutter
Stock Ref. No. 45 40 59
Silhouette 150XT -
Single speed 150mm kitchen fan with integral adjustable electronic overrun timer (up to 30 mins), neon running light and electric backdraught shutter.
Stock Ref. No. 45 40 60
Silhouette 150XH -
Single speed 150mm with integral adjustable auto humidity sensor from 60-90% RH, adjustable overrun timer (up to 20 mins) neon running light and electric backdraught shutter.
Stock Ref. No. 45 40 61
| Type
| Stock Ref. No.
| Timer
30 mins
| Humidstat
60-90%RH
| Performance
|
| m³/h
| l/s
| Watts
| dB(A) @ 3m
|
For utility rooms and kitchens
|
| Silhouette 150X | 45 40 59 | | | 280 | 78
| 35 | 47
|
| Silhouette 150XT | 45 40 60 | Yes | | 280 | 78
| 35 | 47
|
| Silhouette 150XH | 45 40 61 | Yes | Yes | 280 | 78
| 35 | 47
|
| Air replacement grille set
|
| Ivory Stock Ref. No. 56 14 01
Brown Stock Ref. No. 56 14 00
|  |
| 150mm Wall Fitting Kits
|
| Stock Ref. No. 45 08 73 - White
Stock Ref. No. 45 46 01 - Brown
| |
Silhouette 150
| Silhouette
| A
| BØ
| C
| D
| E
| F
| G
| H
|
| 150mm | 200 | 152 | Ø148 | 51 | 104
| 129 | 220 | 37
|
Weight 150mm 1.75kg
Silhouette 150
150mm Wall model
Fixing hole diameter 160mmØ
(when wall kit is used)
Supply and install a Silhouette axial fan for installations in walls or ceilings, with electric backdraught shutter on the 150mm version as supplied by
Vent-Axia Ltd
Fleming Way
Crawley
West Sussex
RH10 9YX
Telephone: 01293 526062.
The fan performance should meet the Building Regulations (Document F) Requirements 60 l/s for kitchens (30 minute timer overrun model for internal WC’s). The profile should be no more than19mm thick.
The motor should be a ball bearing motor for installation at any angle and fitted with
Standard Thermal Overload Protection (S.T.O.P.). The fan should be DEMKO Approved.
| 
