XPID - Mixing Box Section
Provides mutual mixing of supply and exhaust air at required ratio.
Optional section length.
Mixing can be set up in the range of 0-100%.
| No: na Tel: +44 (0)844 856 0590 for ordering enquiries |
This product is part of the Viking XP Modular range
Range Overview:
Spanning a duty envelope up to 7.68m³/s Viking XP Air Handling units are available in 7 model sizes.
Viking XP Air handling units have a unique modular frameless construction with smooth internal casing. Modular construction simplifies access/installation with units being delivered in sections for site assembly.
Sandwich construction 1mm panels with 50mm rockwool insulation (110kg/m³) providing high air soundproofing of casing and thermal casing insulation with reduced heat losses.
Connection of sections is simple providing fast and easy installation, and the clean inside surface to the unit, allows easy cleaning.
All internal electrical devices are terminated on the external casing with terminal boxes, simplifying installation and reducing installation costs.
Units are suitable for internal or external application with options on internal and external material finishes.
Easy accessibility to maintenance sections is provided with inspection doors and panels. Variability of connections enables specifiers to combine the side of pipework connections & service access enabling optimisation of the plant room space & ensure easy access for maintenance.
Design request
To request a Viking XP design & quotation, please download the design request form on the right of this page or click here
Click for more information about the rangeDownloads for the Viking XP Modular range
Model Range
 | XPVP - Direct Drive Fan Section Centifrugal plug-fan with free impeller.
| ||||
 | XPVA - Belt Drive Fan Section DIDW forward curved centrifugal fan.
| ||||
 | XPVR - Belt Drive Fan Section DIDW backward curved centrifugal fan.
| ||||
 | XPID - Mixing Box Section Provides mutual mixing of supply and exhaust air at required ratio. Optional section length. Mixing can be set up in the range of 0-100%.
| ||||
| XPID - Mixing Box Section Provides mutual mixing of supply and exhaust air at required ratio. Optional section length. Mixing can be set up in the range of 0-100%.
| ||||
 | XPXK - Plate Heat Exchanger Section Cross heat exchanger with internal by-pass. Plate heat exchanger provides heat transfer by steady flow from outlet air to the inlet air brought in through exchanger with large surface. Perfect separation of air inlet and outlet Efficiency: up to 70 % Maximum air flow velocity: 3 m/s
| ||||
 | XPJS - Access/Service Section Service section is used for service purposes inside the unit and for installation of the measuring and control components. Easy access is provided by the wide door. The section can be equipped with stainless condensate tray which terminates in screwed fitting G 1/2.
| ||||
 | XPRO - Base Frame Base frame It is made of zinc-coated metal sheets and is an integral part of every section which forms the unit‘s platform. It comes in three heights: 150 mm, 300 mm and 400 mm and can be equipped with height-adjustable feet. Maximum frame length is 3000 mm, which also specifies the maximum length of the block of sections.
| ||||
 | XPTV - Low Pressure Hot Water Water heating section. High efficiency of heat transmission Energy saving operation. Max. water temperature 130°C Max water pressure 1.5 MPa
| ||||
 | XPTE - Electric Heating Section Electric heating section. High efficiency, low-temperature heating elements. Electrical protection IP44 Minimum air-flow velocity: 1.5m/s
| ||||
 | XPTG - Indirect Gas Fired The built-in gas fired heater is equipped with a metal exchanger (economizer). Equipped with a triple safety thermostat. The section is normally delivered with a thermally resistant, flexible connection at the outlet. The gas section is delivered in a standard design or with by-pass and integrated by-pass damper.
| ||||
 | XPYO - Chilled Water Cooling Max. Water pressure of cooler water: 1.6MPa Coolant: R407 or R410A A condensate elimantor is provided when required in the cooling or heat exchanger sections.
| ||||
 | XPPO - Attenuator Section Absorbant splitter noise attenuators are intended for attenuation of noise coming from the fans both at the inlet and the outlet.
| ||||
 | XPHV - Panel Filter Section Filtration class: EU3 Final pressure loss at specified air-flow rate 250Pa.
| ||||
 | XPHO - Bag Filter Section Filter section with high efficiency bag filter. Intended for the first and third filtration stages in dependence on the class of filtration fabric used. Filtration class: EU3 - EU9 Final pressure loss at specified airflow rate: EU =< 4 250Pa EU > 4 400Pa
|
