shadow
Vent-Axia

Ventwise

Print Page
Prices and stock levels correct at the time of printing (23/07/14 4:47)

• Automatically boosts fan when temperature of the supply pipe to a shower or bath increases
• Automatically boosts fan when electric hob is switched on
• Can be used in conjunction with manual override input
• Adjustable overrun timer
• Two sensor options available.

No: 435960

Accessories

Model: 435994Ventwise Current Sensor 4m
Current sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref No: 435994
Please call 0844 856 0590 for
further availability information.
Model: 435956Ventwise Current Sensor 6m
Current sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref No: 435956
Model: 435957Ventwise Current Sensor 12m
Current sensor for use with Ventwise Controller. 12 metre lead length
Stock Ref No: 435957
Model: 435995Ventwise Temperature Sensor 4m
Temperature sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref No: 435995
Model: 435958Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref No: 435958
Model: 435959Ventwise Temperature Sensor 12m
Temperature sensor for use with Ventwise Controller. 12 metre lead length
Stock Ref No: 435959

This product is part of the Vent Axia Sensors and Switches range:

For ventilation systems to be truly efficient it is important for them to operate only when needed. Our range of Sentinel demand ventilation systems along with our controls and sensors help respond to the exact ventilation requirements of a room at any one time. Providing airflow only when it is required and at the level that it is required ensures that only the energy that is needed is used; no more no less. Approved Document L now recognises the value that controls can offer and you will find Vent-Axia offer a range of solutions to ensure that you can maximise the benefit of automation where ever you chose to use it.

Click for more information about the range
Ambient Response Humidity Sensor
The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls. Features & Benefits:
  • Ambient operating temp range +5°C to +40°C.
  • Changeover relay switch.
  • Stock Ref No: 563550
Ecotronic Humidity Sensor
An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Features & Benefits:
  • Ambient operating temp range 0°C to +40°C.
  • BEAB Approved.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Maximum switching load 1 amp inductive.
  • Pullcord override indicated by lamp.
  • Setting Range: 65% - 90%RH.
  • Stock Ref No: 563532
Vent-Axia HumidiSwitch
Operates Vent-Axia ventilating units on either a rise or a fall in humidity to control the damaging effects of condensation. Features & Benefits:
  • Ambient operating temp range 0°C to +50°C.
  • Concealed Adjustment.
  • Designed for use with controllers with 'Auto' mode facility.
  • Dimensions: 82 x 132 x 40mm (H x W x D).
  • Rating 2A (1A inductive).
  • Setting Range: 20% - 80%RH.
  • Single pole changeover contacts.
  • Switching Range 120-240V.
Downloads
Stock Ref No: 563501
Vent-Axia ThermoSwitch
Automatically switches On fans on either a rise or fall in air temperature. The ThermoSwitch can be used with all Vent-Axia fans (via switchgear if appropriate) for the removal of warm air from buildings. It can also be used to switch On Hi-Line ceiling fans for Summer cooling and to move high level warm air down to the working level during Winter. Features & Benefits:
  • IP20 rated.
  • Contact rating: 1.5amp (inductive).
  • Dimensions: 80 x 104 x 36mm (H x W x D).
  • Stock Ref No: 563502
TIM2 Overrun Timer
The TIM2 is a remote mounting electronic overrun timer with a relay output. 2 Amp indication load maximum. Adjustable overrun 2-30 mins. Ideal where fans are to be controlled in conjunction with a lighting circuit or activated by remote sensors. 76 x 76 x 41mm (H x W x D)
Stock Ref No: 370346
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms.
Stock Ref No: 563506
Vent-Axia Visionex PIR
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits:
  • Adjustable timer overrun (5-25 minutes).
  • Ambient operating temperature range 0°C to +50°C.
  • Designed to meet IP43.
  • Double insulated.
  • Fits any UK single gang mounting box.
  • Internal use only.
  • Stock Ref No: 459623A
7 Day TimeSwitch
For applications where regular switching is required at fixed periods or at different times on different days of the week, eg: offices, shops, pubs and restaurants. The 7-day TimeSwitch gives twelve On or Off positions per day and can be set for 7 days. The cycle will repeat until changed. Features & Benefits:
  • Ambient operating temp range -20°C to +85°C.
  • Analogue clock display and integral time switches for ease of setting.
  • Dimensions: 104 x 74 x 52mm (H x W x D).
  • Manual override.
  • Stock Ref No: 563515
TimeSpan Controller
Adjustable timer with overrun facility for fans ventilating WCs and other small rooms. For use with any Vent-Axia fan within maximum rating shown.The fan is switched On with the light and keeps running for a pre-set period after the light is switched Off. Features & Benefits:
  • Adjustable time delay 5-25 minutes from the back.
  • Ambient operating temp range 0°C to +40°C.
  • BEAB Approved.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Fits to any single gang box.
  • Maximum load 250W inductive.
  • Stock Ref No: 563519
Ambient Response SELV 12 Humidity Sensor
12V Safety Extra Low Voltage version for use with VA100 SELV, Solo SELV, LuminAir SELV and HR100 SELV range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls.
Stock Ref No: 563551
Ambient Response Humidity Sensor Lo-Carbon
Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits:
  • Ambient operating temp range +5°C to +40°C.
  • Changeover relay switch.
  • Stock Ref No: 563552
Ecotronic SELV 12 Humidity Sensor
12V Safety Extra Low Voltage version for use with VA100 SELV, Solo SELV, and LuminAir SELV range. Although suitable for siting within reach of a shower or bath we recommend this model is located out of the spray zone of a bath or shower. Features & Benefits:
  • Ambient operating temp range 0°C to +40°C.
  • BEAB Approved.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Maximum switching load 5.6A @ 12V ac.
  • Pullcord override indicated by lamp.
  • Setting Range: 65% - 90%RH.
  • Stock Ref No: 563531
Guardian Personnel Detector (PIR Sensor)
Suitable for controlling a range of Vent-Axia fans. Continuously monitors an area and activates when a moving body is detected.
Stock Ref No: 563548
1.5 Amp Electronic Controller
Surface mounting. It will provide infinitely variable speed control and features an On/Off/sensor slider with neon indicator. There is an adjustable minimum speed setting. The controller is radio suppressed to BS EN 55014 and electrical connections for use with suitable external sensors are provided. 86 x 156 x 53mm (H x W x D). For flush fitting a metal wall box accessory is available. Hole for wall box:80x150x150mm (HxWxD)
Stock Ref No: W300310
Please call 0844 856 0590 for
further availability information.
Vent-Axia Visionex SELV 12 PIR
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia SELV 12 product. Features & Benefits:
  • Adjustable timer overrun (5-25 minutes).
  • Ambient operating temperature range 0°C to +50°C.
  • Class III products.
  • Designed to meet IP43.
  • Fits any UK single gang mounting box.
  • Internal use only.
  • Maximum load: 5.6 amps inductive @ 12V.
  • No switched live required for internal rooms and toilets.
  • Range of detection up to 10 metres.
  • Stock Ref No: 459624
    Please call 0844 856 0590 for
    further availability information.
3 Pole Isolator
Isolates Live, Neutral and Switched Live for integral timer fans. 6 amp, 3 pole isolator complying to the 3mm contact separation requirement for routine maintenance repair. Downloads Catalogue Pages
Stock Ref No: 563518
Remote Delay Timer
A remote delay timer for use with all domestic products gives the option of offering a 2 minute delay before the fan starts. Once the fan has started the overrun timer is adjustable between 5-25 minutes. Downloads Catalogue Pages
Stock Ref No: 457986
Fan Speed Adjuster
5 step speed adjuster for domestic kitchen extract fans, that can reduce the speed to 40% of its maximum performance. Downloads Catalogue Pages
Stock Ref No: 458153
PIR Timer Switch
The Vent-Axia PIR Timer has been designed to control heating and ventilation. When body heat is no longer detected. Adjustable timing range between 10 seconds and 1 hours. As these timers have been designed for general purpose loads, a neutral feed is required at the switch position. Incandescent, fluorescent and compact fluorescent lighting, heating and ventilation loads. Electric heating can be controlled, either directly or via the heater control circuit. Several timers can be wired in parallel to control the same load if required.
Stock Ref No: 426418A
Electronic Timer for Heating & Ventilation Control
The New Vent-Axia Electronic Timer allows an appliance to be powered for a set time period, and shows the user how much time is left. The timing-out period is adjustable between 15 minutes and 2 hours in 15 minute increments. The LED easy read display shows how much time is left to run during operation.
Stock Ref No: 426415
Please call 0844 856 0590 for
further availability information.
Weatherproof Touch Activated Timer
The Vent-Axia Weatherproof Touch Activated Timer is designed for outdoor applications, with a 103 x 103 x 65mm smooth wall enclosure. This timer can accommodate general purpose loads, and will require a Neutral feed at the switch position. This will allow the unit to be used on various applications from incandescent, fluorescent or compact fluorescent lighting to heating and ventilation loads. The unit has two functions; it can either be used as a Timer, or as a conventional switch.
Stock Ref No: 434720A
Please call 0844 856 0590 for
further availability information.
HR500 Controller (Surface Mounted)
With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable.
  • One controller will operate a maximum of 2 HR500 or HR500X units.
  • On/Off/Sensor mode.
  • Choice of heat exchange or high/low speed extract fan mode.
  • Infinitely variable speed control from low to high.
  • Adjustable minimum speed.
  • With integral thermal cut-out and circuit fuse protection.
Stock Ref No: W14301010
VCON77 Transformer
Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch.
Stock Ref No: 370357
Please call 0844 856 0590 for
further availability information.
Trickle Boost Switch
A single gang switch to boost from high to low speeds on heat recovery systems. 85 x 85 x 10mm (H x W x D)
Stock Ref No: 455213
2-Way Neon Switch + Neons
A double gang switch to boost from high to low speeds on heat recovery systems, incorporating neon lights to indicate speed settings. 85 x 145 x 10mm (H x W x D)
Stock Ref No: 459746
VCON6
Surface or flush mounted manual speed controller, provides on/off together with low, normal and boost speeds with speed interface. 85 x 145 x 30mm ( H x W x D ) 85 x 145 x 40mm ( H x W x D ): With rotary switch
Stock Ref No: 370356
150VA Transformer
Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch.
Stock Ref No: 563538A
Normal Boost Purge Switch
A single gang switch to operate between normal, boost and purge settings. 85 x 85 x 10mm (H x W x D)
Stock Ref No: 5108454
Ventwise
• Automatically boosts fan when temperature of the supply pipe to a shower or bath increases • Automatically boosts fan when electric hob is switched on • Can be used in conjunction with manual override input • Adjustable overrun timer • Two sensor options available.
Stock Ref No: 435960
Sentinel Kinetic Wired Remote Controller
The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
Stock Ref No: 443283
Model: 441780Kinetic Vent Wise Controller
The award wining Vent Wise controller has been designed to fully automate a ventilation system. The unit can be used to switch the unit between trickle and boost speed. The controller saves energy by only switching when cooking is taking place or condensation is being generated. The current sensor detects when the power supply to an oven or hob is switched on. The temperature sensor detects the rise in temperature in the hot feed to a bath or shower. A combination of up to three sensors may be used with one controller
Stock Ref No: 441780
Model: 435994Ventwise Current Sensor 4m
Current sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref No: 435994
Please call 0844 856 0590 for
further availability information.
Model: 435956Ventwise Current Sensor 6m
Current sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref No: 435956
Model: 435957Ventwise Current Sensor 12m
Current sensor for use with Ventwise Controller. 12 metre lead length
Stock Ref No: 435957
Model: 435995Ventwise Temperature Sensor 4m
Temperature sensor for use with Ventwise Controller. 4 metre lead length
Stock Ref No: 435995
Model: 435958Ventwise Temperature Sensor 6m
Temperature sensor for use with Ventwise Controller. 6 metre lead length
Stock Ref No: 435958
Momentary Push Switch
Compatible with the Sentinel Kinetic range, the momentary switch boosts the unit for 30 minutes. 85 x 85 x 10mm (H x W x D)
Stock Ref No: 448929
LED Indicator
Compatible with the Sentinel Kinetic range, the LED Indicator illuminates when the MVHR unit requires a filter check or if the unit has a fault. Supplied with 15 metres of cable. 85 x 85 x 10mm (H x W x D)
Stock Ref No: 448356
Normal Boost Switch - Stainless Steel
A single gang switch to operate normal/boost functions on MVHR systems. Brushed stainless steel finish. 90 x 90 x 18mm (H x W x D)
Stock Ref No: 437320
3 Speed Controller
A three position rotary control which enables the unit to be manually switched from permanent trickle ventilation to either medium or boost speed. 85 x 85 x 25mm (H x W x D) 85 x 85 x 37mm (H x W x D): with rotary switch
Stock Ref No: 563533
TIM2 Overrun Timer
The TIM2 is a remote mounting electronic overrun timer with a relay output. 2 Amp indication load maximum. Adjustable overrun 2-30 mins. Ideal where fans are to be controlled in conjunction with a lighting circuit or activated by remote sensors. 76 x 76 x 41mm (H x W x D)
Stock Ref No: 370346
Isolator Relay Controller
Allows fan unit to be isolated from other mains circuit when used with TIM2, Trickle/Boost switch or light switch control.
Stock Ref No: 442030

Downloads for the Vent Axia Sensors and Switches range


Vent-Axia are leading manufacturers and suppliers of heating, ventilation and air conditioning systems, both in the UK and around the world. For over 75 years, we have led the industry in air ventilation products, systems and services. Whatever your requirement, budget or setting, Vent-Axia can provide the solution you need. From extraction fans for the home to large commercial ventilation solutions, our wide HVAC range features a product for every air handling purpose.

Vent-Axia's popular Lo Carbon range combines all the style and durability you expect from a Vent-Axia product with even greater energy efficiency, helping you to make your property as eco friendly as possible. Together with the Lo Carbon range, demand energy recovery ventilation and heat recovery (HRV) and mechanical extract systems are also available to aid new sustainable building projects to adhere to the Code for Sustainable Homes.

In combination with our exceptional ventilation product range we also offer a comprehensive range of heating products ideal to heat your home, our range of electric heating includes, storage heaters and combination storage heaters,  panel heaters, towel rails, portable heating, fan heaters, convector heaters and radiant heating.  Our latest product introduction brings electric underfloor heating to the portfolio, this range consists of electric underfloor heating mats, underfloor heating thermostats, underfloor heating kits and underfloor heating insulation boards to offer a comprehensive solution.

In addition to our ever-growing domestic and commercial ventilation ranges, Vent-Axia also supply air curtains, hand dryer products and fume handling/smoke fans. We can also support your air conditioning requirements.

Vent-Axia products are available from distributors around the UK and Eire and also around the world via our network of international distributors. Many of our ranges can also be ordered via our online store. Browse our full range of heating, ventilation and air conditioning products by clicking here. You can also contact us for any further enquiries.