Vent-Axia Visionex PIR
Prices and stock levels correct at the time of printing (19/06/13 23:04)
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode.
Features & Benefits:
- Adjustable timer overrun (5-25 minutes).
- Ambient operating temperature range 0°C to +50°C.
- Designed to meet IP43.
- Double insulated.
- Fits any UK single gang mounting box.
- Internal use only.
- Maximum load: 600W inductive. Not suitable for use with lighting.
- No switched live required for internal rooms and toilets.
- Range of detection up to 10 metres.
- Supply voltage 220-240V/1/50Hz.
- Volt-free contacts.
Downloads
Catalogue Pages
| No: 459623A 97 in stock |
Accessories
 | A surface mounting back box is available. A surface mounting back box is available.
|
This product is part of the Vent Axia Sensors and Switches range:
For ventilation systems to be truly efficient it is important for them to operate only when needed. Our range of Sentinel demand ventilation systems along with our controls and sensors help respond to the exact ventilation requirements of a room at any one time. Providing airflow only when it is required and at the level that it is required ensures that only the energy that is needed is used; no more no less. Approved Document L now recognises the value that controls can offer and you will find Vent-Axia offer a range of solutions to ensure that you can maximise the benefit of automation where ever you chose to use it.
Click for more information about the range | Ambient Response Humidity Sensor The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls. Features & Benefits:
| ||||
 | Ecotronic Humidity Sensor An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Features & Benefits:
| ||||
 | Vent-Axia HumidiSwitch Operates Vent-Axia ventilating units on either a rise or a fall in humidity to control the damaging effects of condensation. Features & Benefits:
| ||||
 | Vent-Axia ThermoSwitch Automatically switches On fans on either a rise or fall in air temperature. The ThermoSwitch can be used with all Vent-Axia fans (via switchgear if appropriate) for the removal of warm air from buildings. It can also be used to switch On Hi-Line ceiling fans for Summer cooling and to move high level warm air down to the working level during Winter. Features & Benefits:
| ||||
 | TIM2 The TIM2 is a remote mounting electronic overrun timer with a relay output. 2 Amp indication load maximum. Adjustable overrun 2-30 mins. Ideal where fans are to be controlled in conjunction with a lighting circuit or activated by remote sensors.
| ||||
 | Air Quality Sensor Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms.
| ||||
 | Vent-Axia Visionex PIR A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits:
| ||||
 | 7 Day TimeSwitch For applications where regular switching is required at fixed periods or at different times on different days of the week, eg: offices, shops, pubs and restaurants. The 7-day TimeSwitch gives twelve On or Off positions per day and can be set for 7 days. The cycle will repeat until changed. Features & Benefits:
| ||||
 | TimeSpan Controller Adjustable timer with overrun facility for fans ventilating WCs and other small rooms. For use with any Vent-Axia fan within maximum rating shown.The fan is switched On with the light and keeps running for a pre-set period after the light is switched Off. Features & Benefits:
| ||||
 | Ambient Response SELV 12 Humidity Sensor 12V Safety Extra Low Voltage version for use with VA100 SELV, Solo SELV, LuminAir SELV and HR100 SELV range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Can be wired into controller "Auto" mode connections. Night time RH increment setback feature suppresses uisance tripping when the humidity level gradually rises as the temperature falls.
| ||||
 | Ambient Response Humidity Sensor Lo-Carbon Designed specifically for the Lo-Carbon product range. The latest self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature by switching a Vent-Axia fan ‘On’ for rapid removal of moisture laden air, in domestic bathrooms and kitchens. Night time RH increment setback feature suppresses nuisance ripping when the humidity level gradually rises as the temperature falls. Features & Benefits:
| ||||
 | Ecotronic SELV 12 Humidity Sensor 12V Safety Extra Low Voltage version for use with VA100 SELV, Solo SELV, and LuminAir SELV range. Although suitable for siting within reach of a shower or bath we recommend this model is located out of the spray zone of a bath or shower. Features & Benefits:
| ||||
 | Guardian Personnel Detector (PIR Sensor) Suitable for controlling a range of Vent-Axia fans. Continuously monitors an area and activates when a moving body is detected.
| ||||
 | 1.5 Amp Electronic Controller Surface mounting. It will provide infinitely variable speed control and features an On/Off/sensor slider with neon indicator. There is an adjustable minimum speed setting. The controller is radio suppressed to BS EN 55014 and electrical connections for use with suitable external sensors are provided. 86 x 156 x 53mm (H x W x D). For flush fitting a metal wall box accessory is available. Hole for wall box:80x150x150mm (HxWxD)
| ||||
 | Vent-Axia Visionex SELV 12 PIR A wall or ceiling mounted movement detector for use with any domestic Vent-Axia SELV 12 product. Features & Benefits:
| ||||
 | 3 Pole Isolator Isolates Live, Neutral and Switched Live for integral timer fans. 6 amp, 3 pole isolator complying to the 3mm contact separation requirement for routine maintenance repair. Downloads Catalogue Pages
| ||||
 | Remote Delay Timer A remote delay timer for use with all domestic products gives the option of offering a 2 minute delay before the fan starts. Once the fan has started the overrun timer is adjustable between 5-25 minutes. Downloads Catalogue Pages
| ||||
 | Fan Speed Adjuster 5 step speed adjuster for domestic kitchen extract fans, that can reduce the speed to 40% of its maximum performance. Downloads Catalogue Pages
| ||||
 | PIR Timer Switch The Vent-Axia PIR Timer has been designed to control heating and ventilation. When body heat is no longer detected. Adjustable timing range between 10 seconds and 1 hours. As these timers have been designed for general purpose loads, a neutral feed is required at the switch position. Incandescent, fluorescent and compact fluorescent lighting, heating and ventilation loads. Electric heating can be controlled, either directly or via the heater control circuit. Several timers can be wired in parallel to control the same load if required.
| ||||
 | Electronic Timer for Heating & Ventilation Control The New Vent-Axia Electronic Timer allows an appliance to be powered for a set time period, and shows the user how much time is left. The timing-out period is adjustable between 15 minutes and 2 hours in 15 minute increments. The LED easy read display shows how much time is left to run during operation.
| ||||
 | Weatherproof Touch Activated Timer The Vent-Axia Weatherproof Touch Activated Timer is designed for outdoor applications, with a 103 x 103 x 65mm smooth wall enclosure. This timer can accommodate general purpose loads, and will require a Neutral feed at the switch position. This will allow the unit to be used on various applications from incandescent, fluorescent or compact fluorescent lighting to heating and ventilation loads. The unit has two functions; it can either be used as a Timer, or as a conventional switch.
| ||||
 | HR500 Controller (Surface Mounted) With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable.
| ||||
 | VCON77 Transformer Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch.
| ||||
 | Trickle Boost Switch A single gang switch to boost from high to low speeds on heat recovery systems. 85 x 85 x 10mm (H x W x D)
| ||||
 | 2-Way Neon Switch + Neons A double gang switch to boost from high to low speeds on heat recovery systems, incorporating neon lights to indicate speed settings. 85 x 145 x 10mm (H x W x D)
| ||||
 | VCON6 Surface or flush mounted manual speed controller, provides on/off together with low, normal and boost speeds with speed interface. 85 x 145 x 30mm ( H x W x D ) 85 x 145 x 40mm ( H x W x D ): With rotary switch
| ||||
 | 150VA Transformer Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch.
| ||||
 | Normal Boost Purge Switch A single gang switch to operate between normal, boost and purge settings. 85 x 85 x 10mm (H x W x D)
| ||||
 | Ventwise • Automatically boosts fan when temperature of the supply pipe to a shower or bath increases • Automatically boosts fan when electric hob is switched on • Can be used in conjunction with manual override input • Adjustable overrun timer • Two sensor options available.
| ||||
 | Sentinel Kinetic Wired Remote Controller The Kinetic Wired Remote Controller duplicates all the functions of the on-board controller allowing the unit to be commissioned, controlled and monitored remotely. The controller is supplied with 15 metres of four core cable fitted with an RJ11 plug for fitting to the Kinetic control pcb.
| ||||
| Kinetic Vent Wise Controller The award wining Vent Wise controller has been designed to fully automate a ventilation system. The unit can be used to switch the unit between trickle and boost speed. The controller saves energy by only switching when cooking is taking place or condensation is being generated. The current sensor detects when the power supply to an oven or hob is switched on. The temperature sensor detects the rise in temperature in the hot feed to a bath or shower. A combination of up to three sensors may be used with one controller
| ||||
| Ventwise Current Sensor 4m Current sensor for use with Ventwise Controller. 4 metre lead length
| ||||
| Ventwise Current Sensor 6m Current sensor for use with Ventwise Controller. 6 metre lead length
| ||||
| Ventwise Current Sensor 12m Current sensor for use with Ventwise Controller. 12 metre lead length
| ||||
| Ventwise Temperature Sensor 4m Temperature sensor for use with Ventwise Controller. 4 metre lead length
| ||||
| Ventwise Temperature Sensor 6m Temperature sensor for use with Ventwise Controller. 6 metre lead length
|
