Vent-Axia HumidiSwitch
Prices and stock levels correct at the time of printing (25/05/13 3:55)
Operates Vent-Axia ventilating units on either a rise or a fall in humidity to control the damaging effects of condensation.
Features & Benefits:
- Ambient operating temp range 0°C to +50°C.
- Concealed Adjustment.
- Designed for use with controllers with 'Auto' mode facility.
- Dimensions: 82 x 132 x 40mm (H x W x D).
- Rating 2A (1A inductive).
- Setting Range: 20% - 80%RH.
- Single pole changeover contacts.
- Switching Range 120-240V.
Downloads
Catalogue Pages
| No: 563501 154 in stock |
This product is part of the Vent Axia Industrial Controllers range:
Vent Axia offer a full range of controllers to compliment the Industrial Fan Range.
For controllers matched to specific ventilation Products, please refer to the relevant Fan product page for details.
 | Trackmaster Twin Fan Controller (ITC) The ITC model provides automatic changeover on fan failure as well as enabling a manual selection of either fan for duty sharing or test purposes. (BMS compatible via volt free contacts). This controller must have a permanent live supply. Any On/Off switching must be via the sensor connections S1 and SG terminals.
| ||||
 | Trackmaster Twin Fan Controller (ITC-DS) The ITC-DS model (Duty sharing). Incorporates a timing mechanism which operates alternate fans on 12 or 24 hour intervals, thus ensuring the extended life of the fan bearings. The controller also provides automatic changeover on fan failure along with the facility for manual selection of either fan. (BMS compatible via volt free contacts). This controller must have a permanent live supply. Any On/Off switching must be via the sensor connections S1 and SG terminals
| ||||
 | Remote Visual Indicator (RVC) Wired in conjunction with either an ITC or ITC-DS controller the RVC can be located up to 100m away using low cost ELV wiring. The compact, single gang RVC ELV (Extra Low Voltage) remote visual controller indicates status of Fan 1 and Fan 2 with status/warning lights. Push button allows Fan 1 and Fan 2 with standby (Off) to be selected.
| ||||
 | RSC - Remote Setback Control The RSC multi-speed control system offers 2 speed fan versatility eg. Energy Management for night-time setback. Can be used in conjunction with Vent-Axia ITC, ITC-DS controllers using 5 step auto-transformer speed controllers for speed selection. Uses 24V output from ITC controller. Dimensions: 86mm x 178mm x 100mm (Width x Height x Depth)
| ||||
 | 2.5Amp Electronic Controller Performance can be selected using an electronic controller. Surface mounting Provides infinitely variable speed control and features an On/Off/sensor slider with neon indicator. Adjustable minimum speed setting. Electrical connections for use with suitable external sensors are provided. 86 x 156 x 53mm (HxWxD). Hole for wall box: 80 x 150 x 50mm (H x W x D).
| ||||
 | Electronic Controllers - 3 amp 3 amp electronic controllers provide infinitely variable speed control from preset minimum to maximum. Features an On/Off switch with neon indicator and speed control knob. Built in 'Hard Start' auto maximum speed for a few seconds. Dimensions 150mm x 90mm x 65mm (Width x Height x Depth) Weight 0.5kg
| ||||
 | Electronic Controllers - 6 amp 6 amp electronic controllers provide infinitely variable speed control from preset minimum to maximum. Features an On/Off switch with neon indicator and speed control knob. Built in 'Hard Start' auto maximum speed for a few seconds. Dimensions 150mm x 90mm x 65mm (Width x Height x Depth) Weight 0.5kg
| ||||
 | Electronic Controllers - 10 amp 10 amp electronic controller provides infinitely variable speed control from preset minimum to maximum and feature On/Off Override switch for maximum speed. Neon indicator and built-in 'Hard Start' auto-maximum speed for a few seconds. Dimensions 167mm x 220mm x130mm (width x Height x Depth) Weight 1.3 Kg
| ||||
 | 5 Step Auto Transformer - 3 Amp Single Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 240V/1PH/50Hz, Max 3 Amps Output voltages at 240V/1PH/50Hz 0, 90, 115, 140, 175, 240 volts. Enclosures are protected to IP54 Dimension, 135mm x 170mm x 117mm (width x height x depth) Weight 4.0 Kg
| ||||
 | 5 Step Auto Transformer - 5 Amps Single Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 240V/1PH/50Hz, Max 5 Amps Output voltages at 240V/1PH/50Hz 0, 90, 115, 140, 175, 240 volts. Enclosures are protected to IP54 Dimension, 167mm x 219mm x 108mm (width x height x depth) Weight 5.0 Kg
| ||||
 | 5 Step Auto Transformer - 7.5 Amps Single Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 240V/1PH/50Hz, Max 7.5 Amps Output voltages at 240V/1PH/50Hz 0, 90, 115, 140, 175, 240 volts. Enclosures are protected to IP54 Dimension, 200mm x 253mm x 170mm (width x height x depth) Weight 9.0 Kg
| ||||
 | 5 Step Auto Transformer - 13.6 Amps Single Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 240V/1PH/50Hz, Max 13.6 Amps Output voltages at 240V/1PH/50Hz 0, 90, 115, 140, 175, 240 volts. Enclosures are protected to IP54 Dimension, 320mm x 240mm x 190mm (width x height x depth) Weight 13.0 Kg
| ||||
 | 5 Step Auto Transformer - 1.4 Amp Three Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 415V/3PH/50Hz, Max 1.4 Amps Output voltages at 415V/3PH/50Hz 0, 65, 110, 175, 285, 415 volts. Enclosures are protected to IP54 Dimension, 200mm x 253mm x 170mm (width x height x depth) Weight 6.0 Kg
| ||||
 | 5 Step Auto Transformer - 4.0 Amp Three Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 415V/3PH/50Hz, Max 4.0 Amps Output voltages at 415V/3PH/50Hz 0, 65, 110, 175, 285, 415 volts. Enclosures are protected to IP54 Dimension, 240mm x 320mm x 190mm (width x height x depth) Weight 13.0 Kg
| ||||
 | 5 Step Auto Transformer - 7.0 Amp Three Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 415V/3PH/50Hz, Max 7.0 Amps Output voltages at 415V/3PH/50Hz 0, 65, 110, 175, 285, 415 volts. Enclosures are protected to IP54 Dimension, 300mm x 400mm x 150mm (width x height x depth) Weight 27.2 Kg
| ||||
 | 5 Step Auto Transformer - 11.0 Amp Three Phase Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 415V/3PH/50Hz, Max 11.0 Amps Output voltages at 415V/3PH/50Hz 0, 65, 110, 175, 285, 415 volts. Enclosures are protected to IP54 Dimension, 300mm x 400mm x 150mm (width x height x depth) Weight 34.2 Kg
| ||||
 | Thermo Switch Automatically switches on fans on either a rise or fall in air temperature. Can be used for Trickle/ Boost operation on either intake or extract systems. Setting range: +6°C to +30°C. Two internal range limit/locking rings are included to allow setting within a limited temperature range or locking at a fixed set-point. IP20 rated. Sealed sensing mechanism. Mounting direct on surface only. Dimensions: 80 x 104 x 36mm (H x W x D).
| ||||
 | 7 Day TimeSwitch For applications where regular switching is required at fixed periods or at different times on different days of the week, eg: offices, shops, pubs and restaurants. The 7-day TimeSwitch gives twelve On or Off positions per day and can be set for 7 days. The cycle will repeat until changed. Features & Benefits:
| ||||
 | Ecotronic Humidity Sensor An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90%RH. Can be wired into controller "Auto" mode connections. Incorporates changeover switch to select low/high speed. Features & Benefits:
| ||||
 | Vent-Axia HumidiSwitch Operates Vent-Axia ventilating units on either a rise or a fall in humidity to control the damaging effects of condensation. Features & Benefits:
| ||||
 | Air Quality Sensor Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms.
| ||||
 | Vent-Axia Visionex PIR A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Features & Benefits:
| ||||
 | Electric Heater Controller The Electric Heater Controller is rated at 220-240V 50Hz single phase, designed for wall mounting and use with Vent-Axia single or three phase fans and single stage Duct Air Heaters. When used with appropriate Vent-Axia sensors, it provides safe thermal and electrical control of fan and duct heater installations. Connections for sensors (ie Thermostats, Airflow witches, Overload Relays, Fans Thermal Protection and Duct Heater Cut-Outs) are provided within the controller. A three position rotary switch provides ‘Auto’, ‘Off’ and ‘Manual’ settings, as follows:
| ||||
 | Electronic Controller - 20 amp Single Phase 20 amp electronic controller provides infinitely variable speed control from preset minimum to preset maximum via lid mounted potentiometer and features; On/Off Override contacts for remote switching Built-in 'Hard Start' auto-maximum speed for a few seconds. 24V (80mA) supply for remote sensors(lid potentiometer to be disconnected) 0-10v Input for remote sensor Motor Thermal protection connections (TP's) IP rating - IP54 Weight 2.3 Kg
|
