Touch Activated Electronic Timer with Neon

The Vent-Axia Electronic Touch Activated Timer with Neon has been designed for general purpose loads, a Neutral feed is
required at the switch position. The unit has a temporary neon indicator –the neon is illuminated only when the unit is timing out.

The timer can be used on various applications from incandescent, fluorescent and compact fluorescent lighting to heating and ventilation loads.Three different modes of operation can be set on the timer to provide a variety of options to suit particular
applications;

On/Off Mode: Operating the unit will start the timing sequence. Operating the unit again during operation will stop the sequence immediately. If the unit is not pressed again after initial operation, the timer will switch off after the adjustable preset time period has elapsed.

Resetting Mode: Operating the unit will start the timing sequence. Operating the unit again during operation will restart the
timing sequence. Non-Resetting Mode: Operating the unit will
start the timing sequence. Operating the unit again during operation will have no effect.

The timer can be wired as a master unit, with slave switches used for activation. Various styles of slave switch can be used,
and in most installations only a pair of wires will be required for the slave switches (if the slave switches have neon indicators or backlit buttons, a separate Live and Neutral feed will usually be required to illuminate the neon).

The unit is supplied with M3.5 fixing screws as standard, together with blanking plugs to cover the screw heads.