Euroflow - SDX In-Line Centrifugal Duct fan - 125mm Diameter
- 125mm diameter
- Motor Insulation Class B, protected to IP44
- Operating Temperatures from -15°C up to +40°C
- HOT SPOT Protection
- Suitable for speed control using electronic or Voltage controller
- Quality Assurance to BS EN ISO 9001:1994
- Performance tested to BS848 Part 1 1980
- 2 Year Warranty.
| No: SDX125B|
267 in stock
|Single Phase SP & SPTK (Electronic) - 1.7 amps|
Single phase Electronic voltage control to provide stepless speed control to single phase fans complete with neon indicator light. Maximum current rating 1.7 Amps Downloads Catalogue Pages
|Single Phase SPM (Auto-Transformer) - 2 amps|
Single phase 5 Step Autotransformer speed controller. Downloads Catalogue Pages
This product is part of the New Euroflow In-Line Centrifugal Duct fans - SDX range:
The New “SDX” Euroflow in-line centrifugal duct fans shall be as supplied from Roof Units, designed around an efficient backward curved centrifugal impeller and external rotor motor, to ensure a compact design, high performance and low sound levels.
The in-line fan shall be constructed from steel and incorporate an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit. All models are to have 25 or 30mm inlet and discharge spigots, for ease of installation and shall come complete with mounting feet for horizontal or vertical mounting.
Euroflow shall be available in twelve models, sizes 100, 125, 150, 160, 200, 250 & 315mm diameter, with sizes 150 to 315 available as a standard or high performance in-line centrifugal duct fan. The range shall provide a performance from 0.01³/s to 0.435m³/s with a maximum pressure development of up to 500 Pa.
The impellers shall be aerodynamically designed centrifugal backward curved type, manufactured from steel or polyamide. The motor and impeller shall be factory matched, statically and dynamically balanced in two planes to ISO 1940, Grade G 6.3.
All sizes from 100 to 315 shall be protected to IP44 in accordance with BS EN 60529:1992. With motor insulation Class B, suitable for operating temperatures from -15°C to +40°C and atmospheres up to 95% RH. The range shall incorporate maintenance free external rotor motors, fitted with sealed for life ball bearings, ideally suited for speed control by electronic or voltage reduction. The motors shall be wound to suit a 230V/1PH/50Hz electrical supply, with all motors permanent capacitor type to optimise efficiency. HOT SPOT protection by means of a thermal contact switch incorporated within the windings shall be provided to prevent motor damage due to overloading/overheating.
An IP44 terminal box shall be supplied with all models with 20mm entry.
The fan performance shall be in accordance with tests to BS848 Part 1 1980, with the fan sound levels measured in a reverberant chamber in accordance with BS848 Part 2 1985.
Design and manufacture shall be in accordance with the standard for quality management systems BS EN ISO 9001:1994.
A full range of accessories are available with the Euroflow in-line centrifugal duct fans such as:
• Electronic Speed Controllers
• Auto Transformer Speed Controllers
• D.O.L. Starters
• Pre & Secondary Filter Cassettes
• Electric Heater Batteries
• In-Line Attenuators
• Backdraught Shutters
• Fast Clamps
• Flexible Ducting
• Wall Terminals
• Roof Terminals
|Euroflow - SDX In-Line Centrifugal Duct fan - 100mm Diameter|
|Euroflow - SDX In-Line Centrifugal Duct fan - 125mm Diameter|
|Euroflow - SDX In-Line Centrifugal Duct fan - 150mm Diameter|
|Euroflow - SDX In-Line Centrifugal Duct fan - 200mm Diameter|
|Euroflow - SDX In-Line Centrifugal Duct fan - 250mm Diameter|
|Euroflow - SDX In-Line Centrifugal Duct fan - 315mm Diameter|
|Euroflow - SDX High performance In-Line Centrifugal Duct fan - 150mm Diameter|
|Euroflow - SDX High Performance In-Line Centrifugal Duct fan - 200mm Diameter|
|Euroflow - SDX High performance In-Line Centrifugal Duct fan - 250mm Diameter|
|Euroflow - SDX High Performance In-Line Centrifugal Duct fan - 315mm Diameter|