This product is part of the Lo-Carbon T-Series Window Models range

Range Overview:

The LoWatt T-Series range is fitted with a new low energy DC motor, developed to improve performance, lower running costs and maintain T-Series' rugged reliability.

Designed for installation through single or double glazing and material up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Alternatively, the T-Series range can be used in conjunction with Vent-Axia ventilation accessories in flexible and rigid ducting systems to suit individual requirements. The fan can also be mounted in a fixing plate on walls or above ceilings.

Instantaneous Shutter

With energy saving in mind LoWatt T-Series models are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. With a LoWatt T-Series Controller the fan will operate on both extract and intake, suitable for any angle of mounting. The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum backdraught protection when the ventilating unit is used with a LoWatt T-Series controller.

Wire-less Control

Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away.

Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.

Fitting

Fitting through a round hole in the window, LoWatt T-Series is supplied with fixing screws which are finger-tightened to ensure even pressure and a watertight seal on a smooth outside surface.

NEW LoWatt T-Series Controller

LoWatt Controller LoWatt T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors.

Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.

Sensors

Can be used in conjunction with a LoWatt T-Series Controller

Ambient Response Humidity Sensor - Self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature. Night time RH increment setback feature

Ecotronic Humidity Sensor - Adjustable set point, solid state controller. Pullcord provides manual override. Adjustable from 65% to 90%RH.

Air Quality Sensor - Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas

Downloads for the Lo-Carbon T-Series Window Models range

• F&W Instructions
• Catalogue Page

Other models in the range

	LoWatt TX9WW Wireless
	LoWatt TX9WW
	LoWatt TX12WW Wireless
	LoWatt TX12WW