Daikin Altherma High Temperature system Hydrobox and domestic hot water cylinder
Daikin Altherma High Temperature can provide water temperature up to 80°C
Daikin Altherma HT system is a unique cascading heat pump solution that can deliver water temperatures up to 80°C. For many older, harder to heat houses, Daikin Altherma HT can be installed to directly replace the traditional boiler system without the need for other expensive modifications.
1 Your domestic heating system
No need to replace your existing radiators when installing the Daikin Altherma HT system.
2 Your domestic hot water
The design of the indoor unit allows the Dakin Altherma hot water cylinder to be stacked on top of the Daikin Altherma indoor unit therefore optimising space.
3 Your solar thermal system
For high temperature heat pumps, Daikin offers you a solar system for greater efficiency and cost-savings.
| No: ERSQ011AV1 Tel: +44 (0)844 856 0590 for ordering enquiries |
Product Specification
| Daikin Altherma High Temperature System, Hydrobox single and three phase |
| Description | Phase | Nominal Output | leaving water temperature oC | recommended fuse | To use with outdoor unit | Dimensions HxWxD |
|---|---|---|---|---|---|---|
| EKHBRD011AV1 | 1 | 11 | 25-80 | 32 | ERSQ011AV1 | 705x600x695 |
| EKHBRD014AV1 | 1 | 14 | 25-80 | 32 | ERSQ014AV1 | 705x600x695 |
| EKHBRD016AV1 | 1 | 16 | 25-80 | 32 | ERSQ016AV1 | 705x600x695 |
| EKHBRD011AY1 | 3 | 11 | 25-80 | 16 | ERSQ011AY1 | 705x600x695 |
| EKHBRD014AY1 | 3 | 14 | 25-80 | 16 | ERSQ014AY1 | 705x600x695 |
| EKHBRD016AY1 | 3 | 16 | 25-80 | 16 | ERSQ016AY1 | 705x600x695 |
| Daikin Altherma High Temperature System,Domestic hot water cylinder |
| Description | Water volume | Maximum water temperature oC | Material | Dry Weight Kg | Dimensions HxWxD |
|---|---|---|---|---|---|
| EKHTSU200A | 200 | 75 | Stainless steel | 81 | 1335x600x695 |
| EKHTSU260A | 260 | 75 | Stainless steel | 89 | 1610x600x695 |
Performance
Nominal Capacity and Power Input based on the following conditions:
Heating Ambient 7°CDB/6°CWB / Leaving Water Temp. 65°C (DT 10°C)
This product is part of the Daikin Altherma Air Source Heat Pumps range
Range Overview:
The Daikin Altherma product range, available from Vent Axia, features a selection of air source heat pumps including single and three-phase split systems from 6-16kW. All split systems comprise separate indoor and outdoor units, with the indoor units available as either heating only or heating and cooling options.
Vent-Axia also offers the Daikin Altherma monobloc system, in which all the hydraulic parts are located within the outdoor unit of the air source heat pump. In this system the water pipes - rather than refrigerant lines - run indoors from the outdoor unit, making installation much quicker and easier for the domestic installer. The monobloc unit is available in both single and three-phase from 11-16kW.
A high temperature air source heat pump completes the range available from Vent-Axia. Available in single and three-phase from 11-16kW, the unit features unique cascade technology that can heat water temperature up to 80°C without needing an electric heater to boost the temperature. The high temperature system is capable of delivering heating and hot water, as a direct replacement for a traditional boiler, without the expense of changing the existing radiators.
Click for more information about the rangeModel Range
 | Daikin Altherma Split System Outdoor Unit This unit captures heat present in the air and transfers it to the indoor unit by means of a refrigerant. Daikin Altherma gives maximum design flexibility for heating and hot water. The outdoor unit can be located up to 70 meters from the indoor unit.
| ||||
 | Daikin Altherma Split System Hydrobox Indoor unit Install it wherever you would like (garage, cellar, kitchen etc.): similar in appearance to a traditional boiler, it feeds into your heating system and your domestic hot water cylinder.
| ||||
 | Daikin Altherma Heating and Cooling Monobloc System The Daikin Altherma Monobloc system is a complete system, there is no need to provide any space for internal parts except for the domestic hot water cylinder and distribution system.
| ||||
 | Daikin Altherma High Temperature system Hydrobox and domestic hot water cylinder Daikin Altherma High Temperature can provide water temperature up to 80°C Daikin Altherma HT system is a unique cascading heat pump solution that can deliver water temperatures up to 80°C. For many older, harder to heat houses, Daikin Altherma HT can be installed to directly replace the traditional boiler system without the need for other expensive modifications. 1 Your domestic heating system No need to replace your existing radiators when installing the Daikin Altherma HT system. 2 Your domestic hot water
| ||||
 | Daikin Altherma High Temperature Outdoor Unit Daikin Altherma High Temperature can provide water temperature up to 80°C Daikin Altherma HT system is a unique cascading heat pump solution that can deliver water temperatures up to 80°C. For many older, harder to heat houses, Daikin Altherma HT can be installed to directly replace the traditional boiler system without the need for other expensive modifications. 1 Your domestic heating system No need to replace your existing radiators when installing the Daikin Altherma HT system. 2 Your domestic hot water
| ||||
 | Daikin Altherma Hot Water Cylinder The Daikin Altherma domestic hot water cylinder supplies your domestic hot water needs all year round and can take care of extra heat required in the shower, bath or sink. It is available in stainless steel in three capacities: 150, 200 and 300 litres.
|
