AirTrak In-Line Centrifugal Duct fan - 150mm Diameter
- 150mm diameter
- Motor Insulation Class B, protected to IP44
- IP54 Terminal box
- Operating Temperatures from -30°C up to +40°C
- Suitable for speed control using electronic or Voltage controller
- Quality Assurance to BS EN ISO 9001:1994
- Performance tested to BS848 Part 1 & 2
- 2 Year Warranty.
| No: ACH15012A|
Please call 0844 856 0590 for further availability information
|2.5Amp Electronic Controller|
Performance can be selected using an electronic controller. Surface mounting Provides infinitely variable speed control and features an On/Off/sensor slider with neon indicator. Adjustable minimum speed setting. Electrical connections for use with suitable external sensors are provided. 86 x 156 x 53mm (HxWxD). Hole for wall box: 80 x 150 x 50mm (H x W x D).
|5 Step Auto Transformer - 3 Amp Single Phase|
Used in conjunction with speed controllable fans to provide 5 stepped speed without electronic motor ‘hum’. Several fans can be connected to one transformer provided their combined load does not exceed the controller rating. Rotary switch giving On/Off and five speeds, neon indicator Input Voltage 240V/1PH/50Hz, Max 3 Amps Output voltages at 240V/1PH/50Hz 0, 90, 115, 140, 175, 240 volts. Enclosures are protected to IP54 Dimension, 135mm x 170mm x 117mm (width x height x depth) Weight 4.0 Kg
This product is part of the Airtrak In-Line Centrifugal fans - ACH range:
Metal In-Line centrifugal duct fans are available in six sizes providing a selection of air volumes from 0.08m³/s to 0.5m³/s (290m³/h to 1800m³/h) at free air and capable of pressure development up to 700 Pa.
The fan housing is manufactured from galvanised steel. Models are supplied complete with an easy to fit mounting bracket for horizontal or vertical mounting.
Motor / Impellers
Airtrak Centrifugal models are fitted with an external rotor motor and backward curved impeller assembly for long life and reliability. Sizes 100 & 125 have plastic a plastic impeller. All other sizes have metal impellers. Protected to IP44 according to BS EN 60529 and IEC 34-5. Ball bearings are greased for life and designed to run at any angle. Insulation is Class 'B' (from -30°C to +40°C). Manufacture is controlled to BS EN ISO 9001.
Motors are single phase 220-240V/50 Hz. Capacitor start and run. An IP54 terminal box is supplied with a 650mm flying lead, 20mm entry and the capacitor is conveniently located in the terminal box. All motors are fitted with Standard Thermal Overload Protection (S.T.O.P).Click for more information about the range
|AirTrak In-Line Centrifugal Duct fan - 100mm Diameter|
|AirTrak In-Line Centrifugal Duct fan - 125mm Diameter|
|AirTrak In-Line Centrifugal Duct fan - 150mm Diameter|
| AirTrak In-Line Centrifugal Duct fan - 200mm Diameter|
|AirTrak In-Line Centrifugal Duct fan - 250mm Diameter|
|AirTrak In-Line Centrifugal Duct fan - 315mm Diameter|